Bedienungsanleitung BEKO QWM84 (Seite 38 von 56) (Englisch)

556786

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

38 / EN

Washing Machine /User’s Manual

Troubleshooting

Washing takes longer time than specified in the manual.(*)

• Water pressure is low. >>> Machine waits until taking in adequate amount of water to prevent poor washing

quality due to the decreased amount of water. Therefore, the washing time extends.

• Voltage might be low. >>> Washing time is prolonged to avoid poor washing results when the supply voltage is

low.

• Input temperature of water might be low. >>> Required time to heat up the water extends in cold seasons. Also,

washing time can be lengthened to avoid poor washing results.

• Number of rinses and/or amount of rinse water might have increased. >>> Machine increases the amount of

rinse water when good rinsing is needed and adds an extra rinsing step if necessary.

• Excessive foam might have occurred and automatic foam absorption system might have been activated due to

too much detergent usage. >>> Use recommended amount of detergent.

Programme time does not countdown. (On models with display)(*)

• Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate

amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due

to lack of water. Timer indicator will resume countdown after this.

• Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the

selected temperature.

• Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be activated due

to the unbalanced distribution of the laundry in the drum.

Programme time does not countdown.(*)

• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system

might be activated due to the unbalanced distribution of the laundry in the drum.

Machine does not switch to spinning step.(*)

• There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system

might be activated due to the unbalanced distribution of the laundry in the drum.

• The machine will not spin if water is not drained completely. >>> Check the filter and the draining hose.

• Excessive foam might have occurred and automatic foam absorption system might have been activated due to

too much detergent usage. >>> Use recommended amount of detergent.

Washing performance is poor: Laundry turns gray.(**)

• Insufficient amount of detergent was used over a long period of time. >>> Use the recommended amount of

detergent appropriate for water hardness and the laundry.

• Washing was made at low temperatures for a long time over a long period of time. >>> Select the proper

temperature for the laundry to be washed.

• Insufficient amount of detergent is used with hard waters. >>> Using insufficient amount of detergent with

hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate

graying once it happens. Use the recommended amount of detergent appropriate for water hardness and the

laundry.

• Too much detergent is used. >>> Use the recommended amount of detergent appropriate for water hardness

and the laundry.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO QWM84 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info