Bedienungsanleitung BEKO TBN7602W (Seite 9 von 92) (Deutsch, Englisch, Französisch, Italienisch, Spanisch, Polnisch)

676730

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

9 / EN

Table Blender / User Manual

4 



• To add ice cubes to mixtures while the blender

is operating, add one cube at a time through the

cap (1). Wait a few seconds before adding the

next ice cube so that the blender can properly

blend the ice.

• To add food while the blender is operating,

remove the cap (1) and drop the ingredients

through the opening. Be sure to cut the food

into about 2-5 cm pieces to fit through the

opening. Replace the cap (1) when you have

finished adding ingredients.

• When blending solid food, such as raw

vegetables, cooked or uncooked meat and fruits

always cut them into no larger than 2-5 cm

pieces before placing them into the jug. Blend

no more than 2 cups of these food at a time.

This will speed the blending process and reduce

wear on the blending blades.

• Always place liquid ingredients in the jug first,

unless a recipe specifically states otherwise.

• To blend beverages, place all ingredients in the

jug at the same time.

• Avoid overblending. Usually, you will need to

blend for a few seconds.

• Overblending may cause food to become mushy.



WARNING:

Never use petrol

solvents, abrasive cleaners, metal

objects or hard brushes to clean the

appliance.

WARNING:

The blades of the

cutter unit are very sharp! Handle

the blades with utmost care in order

to avoid injuries.

WARNING:

Never clean the

appliance with your bare hands.

WARNING:

Clean the jug blender

after each use. Do not let any food

remnants harden on and inside the

jug blender. This will make it more

difficult to clean it later.

WARNING:

Do not use boiling

water. The blade assembly bearings

have been designed with a lifetime

lubricant; exposure to boiling water

may damage these bearings and

shorten the life of the blender.

1. Turn the appliance off and disconnect it from

wall socket.

2. Allow the appliance to cool down.

3. Remove the jug D from the motor housing (8).

Rinse with water to remove any large food

particles that may have accumulated in the jug.

You can use the measuring cup (1) to

remove the blender blade.

4. Turn the glass container over and place it on a

level, non-slip surface. Attach the measuring

cup (1) by placing it over the cutting blade unit

(6). Remove the cutting blade unit (6) by turning

it with the measuring cup in the direction of the

“open lock symbol” (counterclockwise). Glass

container, lid and measuring cup can now be

washed in the dishwasher. Carefully rinse the

cutting blade unit under running water.

5. To place the blade unit (6) back to the glass

container (4), turn the blade unit (6) to the

locking “ ” direction (clockwise) using the

measuring cup (1).

6. Replace the jug (4) on the motor

housing (8).

7. Place 1 to 1 ½ cups warm water with some

drops of mild cleanser into the jug (4) and

switch to speed “4” for a few seconds. Remove

the jug from the motor housing and rinse with

water. Repeat as necessary.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO TBN7602W Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info