Bedienungsanleitung BEKO WDER8540421 (Seite 29 von 44) (Englisch)

762619

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

29 / EN Washer-Dryer / User Manual

• Anti-Crease+

If you press and hold the spin selection button

for 3 seconds, this function will be selected and

the programme follow-up light of the relevant

programme will turn on. When this function is

selected, it aerates the laundry for up to 8 hours

at the end of the programme to prevent creasing.

You can cancel the programme and take your

laundry out at any time during the 8-hour

duration. Press the function selection key or the

machine on/off key to cancel the function. The

programme follow-up light will remain on until the

function is cancelled or the step is complete. If

the function cannot be cancelled, it will be active

in the subsequent washing cycles as well.

• Steam

You can press and hold the auxiliary function key

2 for 3 seconds to select this function.

Use this programme to reduce the wrinkles and

shorten the ironing times for a small amount of

cotton, synthetic or mixed clothes that are not

stained.

• Child lock

You can use the Child Lock to prevent children

from tampering with the machine. Thus you can

avoid any changes in a running programme.

INFORMATION

• When the Child Lock is enabled, you can

press the On/Off key to switch the machine

on or off. Programme resumes when you

start the machine again.

• You will hear a warning if the buttons are

pressed while Child Lock is enabled. This

audible warning will be cancelled if the

buttons are pressed five times consecutively.

To enable Child Lock:

Press and hold the Drying Level

Adjustment button

for 3 seconds. When the

countdown

“3-2-1”

on the display ends, child

lock icon will be displayed. Once you see this

warning, you can release the

Drying Level

Adjustment button

To disable Child Lock:

Press and hold the Drying Level

Adjustment button

for 3 seconds. When the

countdown

“3-2-1”

on the display ends, child

lock icon will disappear.

• Bluetooth

You can use the Bluetooth connection function

to pair your machine with your smart device.

This way, you can use your smart device to get

information about your machine and control it.

To enable Bluetooth:

Press and hold the Remote Control

function button

for 3 seconds. You will see

the countdown

“3-2-1”

, and bluetooth symbol

will be displayed. Release the

Remote Control

function button

. The Bluetooth icon will flash

while the product is being paired with the smart

device. If the connection is successful, the light

of the icon will remain on.

To disable Bluetooth:

Press and hold the Remote Control

function button

for 3 seconds. You will see

the countdown

“3-2-1”

, and bluetooth symbol

will be disappear.

INFORMATION

• You must complete the first setup of the

HomeWhiz app for Bluetooth to be enabled.

After the setup, if you press the Remote

Control function button while the button

is in the Programme Download/Remote

Control position, the Bluetooth connection

will be enabled automatically.

5.12 Drying steps

5.12.1 Iron Dry

Drying continues until the drying level reaches

the Iron Dry step.

5.12.2 Cupboard Dry

Drying continues until the drying level reaches

the Cupboard Dry step.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WDER8540421 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info