Bedienungsanleitung BEKO WDIK854151 (Seite 35 von 52) (Englisch)

762654

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

35 / EN Washer-Dryer / User’s Manual

2. Some of our products have emergency

draining hose and some does not have.

Follow the steps below to discharge the water.

Discharging the water when the product does

not have an emergency draining hose:

a. Place a large container in front of the

filter to catch water from the filter.

b. Loosen pump filter (anticlockwise) until

water starts to flow. Fill the flowing water

into the container you have placed in

front of the filter. Always keep a piece of

cloth handy to absorb any spilled water.

c. When the water inside the

machine is finished, take out the

filter completely by turning it.

3. Clean any residues inside the filter

as well as fibers, if any, around

the pump impeller region.

4. Install the filter, turn clockwise to

ensure it is closed and watertight.

7 Troubleshooting

Programmes do not start after the loading door is

closed.

• Start / Pause / Cancel button is not pressed.>>>

*Press Start/

Pause/Cancel button.

• It may be difficult to close the loading door in case of excessive

loading.>>>

*Reduce the amount of laundry and make sure

that the loading door is closed properly.

Programme cannot be started or selected.

• Washing machine has switched to self protection mode due to

a supply problem (line voltage, water pressure, etc. >>>

Press

and hold On/Off button for 3 seconds to reset the machine to

factory settings. (See. “Cancelling the programme”)

Water in the machine.

• Some water may remain in the product due to the quality

control processes in the production. >>>

This is not a failure;

water is not harmful to the machine.

There is water leaking from the bottom of the

machine.

• There is a problem with hoses or the pump filter. >>>

Be sure

the seals of the water inlet hoses are securely fitted. Attach the

hose to the tap tightly.

• Pump filter is not closed securely. >>>

Make sure that the

pump filter is closed securely.

Machine does not fill with water.

• Tap is turned off. >>>

Turn on the taps.

• Water inlet hose is bent. >>>

Flatten the hose.

• Water inlet filter is clogged. >>>

Clean the filter.

• Loading door is not closed. >>>

Close the loading door.

Machine does not drain water.

• Water drain hose is clogged or twisted. >>>

Clean or flatten

the hose.

• Pump filter is clogged. >>>

Clean the pump filter.

Machine vibrates or makes noise.

• Machine is standing unbalanced. >>>

Adjust the feet to level

the machine.

• A hard substance has entered into the pump filter. >>>

Clean

the pump filter.

• Transit bolts are not removed. >>>

Remove the transit bolts.

• Laundry quantity in the machine is too little. >>>

Add more

laundry to the machine.

• Machine is overloaded with laundry. >>>

Take out some of

the laundry from the machine or distribute the load by hand to

balance it.

• Machine is in contact with a rigid surface. >>>

Make sure that

the machine is not contacting anything.

Machine stopped shortly after the programme

started.

• Machine has stopped temporarily due to low voltage. >>>

will resume running when the voltage restores to the normal

level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WDIK854151 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info