Bedienungsanleitung BEKO WDL742441 (Seite 37 von 44) (Englisch)

762622

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

37 / EN Washer-Dryer / User Manual

2. Open the filter cover. Press the tab

in the direction of the arrow and pull

the cover out towards yourself.

3.To drain the water in the machine.

a. In order to collect the water to flow

out of the filter, place a large shallow

vessel in front of the filter.

b. Turn and loosen the pump filter until

water starts to flow (counterclockwise).

Fill the flowing water into the container

you have placed in front of the filter.

Always keep a piece of cloth handy

to absorb any spilled water.

c When the water inside the machine is finished,

take out the filter completely by turning it.

4. Clean any residues inside the filter as well

as fibres, if any, around the pump impeller

region.

5. Replace the filter.

6. Close the filter cover.

7 Troubleshooting

Programmes won’t start after the loading door has

been closed.

• You did not press the Start/Pause/Cancel button.>>>

*Press the

Start/Pause/Cancel button.

• If the load is too much, it might be hard for the loading door to be

closed.>>>

*Load less laundry and make sure that the loading

door is closed properly.

Programme cannot be started or selected.

• The machine may have switched itself to self-protection mode

due to a supply problem (mains voltage, water pressure etc.).

>>>

To cancel the programme, turn the Programme Selection

knob to select another programme. Previous programme will

be cancelled. (see. “Cancellation of programme”)

Water inside the machine.

• There might be some water remaining in the product due to the

quality control processes carried out during production. >>>

This is not a failure, water does not harm the machine.

Water is leaking from the bottom of the machine.

• There might be a problem with the hoses or the pump filter.

>>>

Make sure that the seals of the water inlet hoses are

securely fitted. Attach the hose to the tap tightly.

• Pump filter might not be closed securely. >>>

Make sure that

the pump filter is closed securely.

Machine does not take in water.

• Tap might be turned off. >>>

Turn on the taps.

• Water inlet hose might be bent. >>>

Flatten the hose.

• Water inlet filter might be clogged. >>>

Clean the filter.

• Loading door might not be closed. >>>

Close the loading door.

Machine does not drain water.

• Water drain hose might be clogged or twisted. >>>

Clean or

flatten the hose.

• Pump filter might be clogged. >>>

Clean the pump filter.

Machine vibrates or makes noise.

• Machine might be unbalanced. >>>

Adjust the feet to level the

machine.

• A hard substance might have entered the pump filter. >>>

Clean the pump filter.

• Transportation safety bolts might not be removed. >>>

Remove the transportation safety bolts.

• The amount of laundry might be too little. >>>

Add more

laundry to the machine.

• The machine might be overloaded with laundry. >>>

Take out

some of the laundry from the machine or distribute the load by

hand to balance it evenly in the machine.

• The machine might be in contact with a hard surface. >>>

Make sure that the machine is not in contact with anything.

Machine stopped shortly after the programme started.

• The machine might have stopped temporarily due to low

voltage. >>>

It will resume running once the voltage returns to

a normal level.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WDL742441 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info