Bedienungsanleitung BEKO WEC84P64E2 (Seite 21 von 44) (Englisch)

758237

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

21 / EN

Washing Machine / User Manual

4.3.6 Temperature selection

Whenever a new programme is selected, the recommended temperature for the programme appears on the temperature

indicator. It is possible that the recommended temperature value is not the maximum temperature that can be selected for the

current programme.

Press the Temperature Adjustment button to change the temperature. Temperature decreases gradually.

CNo change can be made in programmes where temperature adjustment is not allowed.

You can also change the temperature after the washing starts. This change can be made if the washing steps

allow it. Changes cannot be made if the steps do not allow it.

CIf you scroll to cold wash option and press Temperature Adjustment button again, the recommended maximum temperature

for the selected programme appears on the display. Press the Temperature Adjustment button again to decrease the

temperature.

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is

displayed on the Spin Speed indicator.

CIt is possible that the recommended spin speed value is not the maximum spin speed that can be selected for the current

programme.

Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases gradually.

Then, depending on the model of the product, "Rinse Hold

" and "No Spin

" options appear on the display.

If you are not going to unload your laundry immediately after the programme completes, you can use Rinse

Hold function in order to prevent them from getting wrinkled when there is no water in the machine.

This function holds the laundry in the final rinsing water.

If you want to spin your laundry after the Rinse Hold function:

- Adjust the Spin Speed.

- Press Start / Pause / Cancel. The programme will resume. Machine drains the water and spins the laundry.

If you want to drain the water at the end of the programme without spinning, use No Spin function.

CNo change can be made in programmes where spin speed adjustment is not allowed.

You can change the spin speed after the washing starts if the washing steps allow it. Changes cannot be

made if the steps do not allow it.

Rinse hold

If you are not going to unload your clothes immediately after the programme completes, you can use rinse

hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled

when there is no water in the machine. Press Start / Pause button after this process if you want to drain the

water without spinning your laundry. Programme will resume and complete after draining the water.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.

The programme will resume. Water is drained, laundry is spun and the programme is completed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WEC84P64E2 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info