Bedienungsanleitung BEKO WM5102 (Seite 13 von 21) (Englisch)

556972

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

13 / 20 EN

Washing Machine / User’s Manual

IftheProgrammeSelectionknobisturnedwhenthe

ChildLockisactive,“Con”appearsonthedisplay.

TheChildLockdoesnotallowanychangeinthe

programmesandtheselectedtemperature,speedand

auxiliary functions.

Even if another programme is selected with the

ProgrammeSelectionknobwhiletheChildLockis

active,previouslyselectedprogrammewillcontinue

running.

WhentheChildLockisactiveandthemachineis

running,youcanswitchthemachinetoPausemode

withoutdeactivatingtheChildLockbyturningthe

ProgrammeSelectionknobtoOn/Offposition.When

youturntheProgrammeSelectionknobafterwards,the

programme will resu

To activate the Child Lock:

Pressandhold1stand2ndAuxiliaryFunctionbuttonsfor

3seconds.Thelightsonthe1stand2ndAuxiliaryFunction

buttonswillflashwhileyoukeepthebuttonspressedfor3

seconds.

To deactivate the Child Lock:

Pressandhold1stand2ndauxiliaryfunctionbuttonsfor3

seconds while any programme is running. The lights on the

1stand2ndAuxiliaryFunctionbuttonswillflashwhileyou

keepthebuttonspressedfor3seconds.

Inadditiontothemethodabove,todeactivatetheChild

Lock,switchtheProgrammeSelectionknobtoOn/

Offpositionwhennoprogrammeisrunning,andselect

another programme.

Whenthepowerisrestoredafterapowerfailureorafter

yourmachineisunpluggedandpluggedinagain,the

ChildLockwillnotbedeactivatedwhenthemachine

resumes operating.

4.13 Progress of programme

Progressofarunningprogrammecanbefollowedfromthe

ProgrammeFollow-upindicator.Atthebeginningofevery

programmestep,therelevantindicatorlightwillturnonand

light of the completed step will turn off.

Youcanchangetheauxiliaryfunctions,speedand

temperature settings without stopping the programme flow

whiletheprogrammeisrunning.Todothis,thechange

youaregoingtomakemustbeinastepaftertherunning

programmestep.Ifthechangeisnotcompatible,relevant

lights will flash for 3 times.

Ifthemachinedoesnotpasstothespinningstep,

RinseHoldfunctionmightbeactiveortheautomatic

unbalancedloaddetectionsystemmightbeactivated

duetotheunbalanceddistributionofthelaundryinthe

machine.

4.14 Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases when

thewaterlevelisunsuitable.

Loading door light will start flashing when the machine

isswitchedtoPausemode.Machinechecksthelevelof

thewaterinside.Ifthelevelissuitable,LoadingDoorlight

illuminates steadily within 1-2 minutes and the loading door

canbeopened.

Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe

loadingdoorcannotbeopened.Ifyouareobligedtoopen

theLoadingDoorwhiletheLoadingDoorlightisoff,you

havetocancelthecurrentprogramme;see"Cancelingthe

programme".

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthemachineto

pause mode while a programme is running. The light of

the step which the machine is in starts flashing in the

ProgrammeFollow-upindicatortoshowthatthemachine

hasbeenswitchedtothepausemode.

Also,whentheloadingdoorisreadytobeopened,Loading

Doorlightwillalsoilluminatecontinuouslyinadditiontothe

programme step light.

Changing the speed and temperature settings for

auxiliary functions

Dependingonthesteptheprogrammehasreached,you

maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary

functionselection".

You may also change the speed and temperature settings;

see,"Spinspeedselection"and"Temperatureselection".

Ifnochangeisallowed,therelevantlightwillflashfor

3 times.

4.15 Adding or taking out laundry

PresstheStart/Pausebuttontoswitchthemachineto

pause mode. The programme follow-up light of the relevant

step during which the machine was switched into the pause

modewillflash.WaituntiltheLoadingDoorcanbeopened.

OpentheLoadingDoorandaddortakeoutthelaundry.

ClosetheLoadingDoor.Makechangesinauxiliaryfunctions,

temperatureandspeedsettingsifnecessary.PressStart/

Pausebuttontostartthemachine.

4.16 Canceling the programme

Tocanceltheprogramme,turntheProgrammeSelection

knobtoselectanotherprogramme.Previousprogramme

willbecanceled.End/Cancellightwillflashcontinuouslyto

notifythattheprogrammehasbeencanceled.

Your machine will end the programme when you turn the

ProgrammeSelectionknob;however,itdoesnotdrainthe

waterinside.Whenyouselectandstartanewprogramme,

the newly selected programme will start depending on the

stepthepreviousprogrammewascanceledin.Forexample,

it may take in additional water or continue to wash with the

water inside.

Dependingonthestepwheretheprogrammewas

canceledin,youmayhavetoputdetergentandsoftener

again for the programme you have selected anew.

BEKO WM5102 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info