Bedienungsanleitung BEKO WM6110W (Seite 22 von 36) (Englisch)

617411

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Auxiliary function selection

Select the desired auxiliary functions before

starting the programme. Furthermore, you

can also select or cancel auxiliary functions

that are suitable to the running programme

without pressing the Start / Pause / Cancel

button when the machine is operating. For

this, the machine must be in a step before

the auxiliary function you are going to

select or cancel.

If the auxiliary function cannot be selected

or cancelled, light of the relevant auxiliary

function will blink 3 times to warn the user.

Some functions cannot be selected

together. If a second auxiliary function

conﬂicting with the ﬁrst one is selected

before starting the machine, the

function selected ﬁrst will be canceled

and the second auxiliary function

selection will remain active.

compatible with the programme cannot

be selected. (See "Programme and

consumption table")

according to the model of the machine.

soiled laundry. Not using the Prewash will

save energy, water, detergent and time.

excessive foaming, wash the nets/tulle

by putting little amount of detergent

into the main wash compartment.

Do not put detergent in the prewash

compartment.

This function enables the machine to

make another rinsing in addition to the one

already made after the main wash. Thus,

the risk for sensitive skins (babies, allergic

skins, etc.) to be effected by the minimal

detergent remnants on the laundry can be

reduced.

If you are not going to unload your

clothes immediately after the programme

completes, you can use rinse hold function

to keep your laundry in the ﬁnal rinsing

water in order to prevent them from getting

wrinkled when there is no water in the

machine.

In models equipped with Spin Speed

and press Start / Pause / Cancel button if

you want to spin the laundry held in water.

In models not equipped with Spin Speed

Adjustment button, select Spin+Drain

programme if you want to spin your laundry

held in water.

In these models, you need to stop the

machine by pressing Start / Pause /

Cancel button before switching to spin

step and after drain step is completed

and the water in the machine is

drained. Thus, water inside the

machine is drained and your laundry is

not spun.

Use this function if you want to wash your

laundry in cold water.

Use this function if you do not want

your clothes be spun at the end of the

programme.

This function allows spinning of laundry at a

speed lower than the maximum spin speed

of the machine.

spin speed will be limited to the minimum

speed speciﬁed on the control panel.

Starting the programme

start the programme.

2. Start / Pause / Cancel button lights up

to indicate that the programme has

started.

3. Loading door is locked and Loading

Door light turns off.

Child Lock

Use Child Lock function to prevent children

from tampering with the machine. Thus

you can avoid any changes in a running

programme.

You can switch on and off the machine

with On / Off button when the Child

Lock is active. When you switch on the

machine again, programme will resume

from where it has stopped with the

child lock enabled.

To activate the Child Lock:

and 2

Function buttons for 3 seconds

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WM6110W Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info