Bedienungsanleitung BEKO WM72CPW (Seite 26 von 40) (Englisch)

556834

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Progress of programme

Progress of a running programme

can be followed from the Programme

of every programme step, the relevant

indicator light will turn on and light of the

completed step will turn off.

speed and temperature settings without

stopping the programme ﬂow while the

programme is running. To do this, the

change you are going to make must be in

a step after the running programme step.

If the change is not compatible, relevant

lights will ﬂash for 3 times.

If the machine does not pass to the

might be active or the automatic

unbalanced load detection system

might be activated due to the

unbalanced distribution of the laundry

in the machine.

Loading door lock

There is a locking system on the loading

door of the machine that prevents

opening of the door in cases when the

water level is unsuitable.

Loading door light will start ﬂashing when

the machine is switched to Pause mode.

Machine checks the level of the water

inside. If the level is suitable, Loading

minutes and the loading door can be

opened.

If the level is unsuitable, Loading Door

light turns off and the loading door cannot

be opened. If you are obliged to open

the Loading Door while the Loading

Door light is off, you have to cancel the

current programme; see "Cancelling the

programme".

Changing the selections after

programme has started

Switching the machine to pause

mode

the machine to pause mode while a

programme is running. The light of the

step which the machine is in starts

ﬂashing in the Programme Follow-up

indicator to show that the machine has

been switched to the pause mode.

be opened, Loading Door light will also

illuminate continuously in addition to the

programme step light.

Changing the speed and temperature

settings for auxiliary functions

Depending on the step the programme

has reached, you may cancel or activate

function selection".

temperature settings; see, "Spin speed

selection" and "Temperature selection".

If no change is allowed, the relevant

light will ﬂash for 3 times.

Adding or taking out laundry

the machine to pause mode. The

programme follow-up light of the

relevant step during which the

machine was switched into the pause

mode will ﬂash.

Wait until the Loading Door can be

opened. Open the Loading Door and add

or take out the laundry. Close the Loading

Door. Make changes in auxiliary functions,

temperature and speed settings if

start the machine.

Cancelling the programme

To cancel the programme, turn the

Programme Selection knob to select

another programme. Previous programme

will ﬂash continuously to notify that the

programme has been canceled.

will be cancelled. End / Cancel light

when you turn the Programme Selection

knob; however, it does not drain the

water inside. When you select and start

a new programme, the newly selected

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WM72CPW Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info