Bedienungsanleitung BEKO WMB 51221 C (Seite 68 von 76) (Deutsch, Englisch, Holländisch, Französisch)

676601

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ProgrammeSelectionknobtoanyprogramme.

Thus,DelayedStartfunctionwillbecanceled.The

End/Cancel light flashes continuously. Then, select

theprogrammeyouwanttorunagain.PressStart

/Pausebuttontostarttheprogramme.

Starting the programme

PressStart/Pausebuttontostarttheprogramme.

Programmefollow-uplightshowingthestartupof

the programme will turn on.

 Ifnoprogrammeisstartedornokeyis

pressedwithin1minuteduringprogramme

selection process, the machine will switch

toPausemodeandtheilluminationlevelof

the temperature, speed and loading door

indicator lights will decrease. Other indicator

lights and indicators will turn off. Once the

ProgrammeSelectionknobisrotatedor

any button is pressed, indicator lights and

indicators will turn on again.

Child Lock

Use child lock function to prevent children from

tampering with the machine. Thus you can avoid

any changes in a running programme.

 IftheProgrammeSelectionknobisrotated

when the child lock is active, the lights on the

and 2

auxiliaryfunctionbuttonswillblink

3 times. The child lock does not allow any

change in the programmes and the selected

temperature,speedandauxiliaryfunctions.

Even if another programme is selected with

theProgrammeSelectionknobwhiletheChild

Lockisactive,previouslyselectedprogramme

will continue running.

 WhentheChildLockisactiveandthe

machine is running, you can switch the

machinetoPausemodewithoutdeactivating

theChildLockbyturningtheProgramme

SelectionknobtoOn/Offposition.When

youturntheProgrammeSelectionknob

afterwards, the programme will resume.

ToactivatetheChildLock:

Pressandhold1

and 2

AuxiliaryFunction

buttonsfor3seconds.Thelightsonthe1

and 2

AuxiliaryFunctionbuttonswillflashwhileyoukeep

the buttons pressed for 3 seconds.

TodeactivatetheChildLock:

Pressandhold1

and 2

auxiliaryfunction

buttons for 3 seconds while any programme is

running.Thelightsonthe1

and 2

Auxiliary

Functionbuttonswillflashwhileyoukeepthe

buttons pressed for 3 seconds.

 Inadditiontothemethodabove,todeactivate

theChildLock,switchtheProgramme

SelectionknobtoOn/Offpositionwhenno

programme is running, and select another

programme.

 Whenthepowerisrestoredafterapower

failure or after your machine is unplugged

andpluggedinagain,theChildLockwillnot

be deactivated when the machine resumes

operating.

Progress of programme

Progressofarunningprogrammecanbefollowed

fromtheProgrammeFollow-upindicator.At

the beginning of every programme step, the

relevant indicator light will turn on and light of the

completed step will turn off.

Youcanchangetheauxiliaryfunctions,speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make must

beinastepaftertherunningprogrammestep.If

the change is not compatible, relevant lights will

flash for 3 times.

 Ifthemachinedoesnotpasstothespinning

step, Rinse Hold function might be active

or the automatic unbalanced load detection

system might be activated due to the

unbalanced distribution of the laundry in the

machine.

Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the door in

cases when the water level is unsuitable.

Loadingdoorlightwillstartflashingwhenthe

machineisswitchedtoPausemode.Machine

checksthelevelofthewaterinside.Ifthelevelis

suitable,LoadingDoorlightilluminatessteadily

within1-2minutesandtheloadingdoorcanbe

opened.

Ifthelevelisunsuitable,LoadingDoorlightturns

offandtheloadingdoorcannotbeopened.If

youareobligedtoopentheLoadingDoorwhile

theLoadingDoorlightisoff,youhavetocancel

the current programme; see "Canceling the

programme".

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pausebuttontoswitchthe

machine to pause mode while a programme is

running. The light of the step which the machine

isinstartsflashingintheProgrammeFollow-up

indicator to show that the machine has been

switched to the pause mode.

Also,whentheloadingdoorisreadytobeopened,

LoadingDoorlightwillalsoilluminatecontinuously

in addition to the programme step light.

Changing the speed and temperature settings

for auxiliary functions

Depending on the step the programme has

reached,youmaycanceloractivatetheauxiliary

functions;see,"Auxiliaryfunctionselection".

You may also change the speed and temperature

settings;see,"Spinspeedselection"and

"Temperature selection".

 Ifnochangeisallowed,therelevantlightwill

flash for 3 times.

BEKO WMB 51221 C Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info