Bedienungsanleitung BEKO WMB 91242 (Seite 20 von 40) (Englisch)

457431

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

20 - EN

Auxiliary functions

Auxiliary Function Selection Buttons

a b c d

• Dependingontheprogram,youcan

select the desired auxiliary function by

pressing the buttons a, b, c,d.

• Selecttherequiredauxiliaryfunctions

before starting the program.

• Somecombinationscannotbeselected

together.Ex.:Pre-washandQuick

Wash.

• Symboloftheselectedauxiliaryfunction

will light up.

Auxiliary function selection

If an auxiliary function that should not be

selected together with a previously selected

function is chosen, the first selected function

will be cancelled and the last auxiliary

function selection will remain active.

Ex.:Ifyouwanttoselectpre-washfirstand

then quick wash, pre-wash will be cancelled

and quick wash will remain active.

Auxiliary function that is not compatible

withtheprogramcannotbeselected.(see,

“ProgramSelectionTable”)

• Prewash

Whenyouselectthisfunction(a),thedisplay

willindicate“F1”symbol.

• Apre-washisonlyworthwhilefor

heavily soiled laundry. Without pre-wash

you save energy, water, detergent and

time.

• Pre-washwithoutdetergentis

recommended for lace and curtains.

• Quick Wash

Withthisfunction(b),thewashtimeis

shortened.“F2”symbollightsuponthe

display.

• Usethisfunctionforsmalleramountsor

slightly soiled laundries.

• Extra Rinse

Whenthisfunction(c)isselected,washing

and rinsing is performed with plenty of

water.“F3”symbollightsuponthedisplay.

• Anti- Crease

Withthisfunction(d),drummovement

will be lessened to prevent creasing and

spinning speed is limited. In addition,

washing is carried out at a higher water

level.“F4”symbollightsuponthedisplay.

• Usethisfunctionfordelicatelaundries

that crease easily.

Whenever you select this auxiliary

function, load your machine with half of

the maximum laundry specified in the

program table.

• Rinse Hold

If you are not going to unload your clothes

immediately after the program completes,

you may use rinse hold function and keep

your laundry in the final rinsing water in order

to prevent them become wrinkled when

thereisnowaterinthemachine.Press

“Start/Pause”buttonafterthisprocessifyou

want to drain the water without spinning.

Programresumes.Yourmachinedrainsthe

water and program completes.

If you want to spin your laundry that you left

inwater:

- Adjust the spin speed.

-PressStart/Pausebutton

Programresumes.Yourmachinedrains

the water, spins the laundry and program

completes.

Time display

The display shows the time remaining for

the program to complete while a program

is running. Time is displayed in hours and

minutes as “01:30”.

Time delay

Withthe“Timedelay”functionyoucan

delay the program start up to 24 hours.

Setting can be made in intervals of 30

minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMB 91242 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info