Bedienungsanleitung BEKO WMB 91442 (Seite 65 von 68) (Deutsch, Englisch, Holländisch, Französisch)

475973

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

programmewillturnon.Loadingdoorislockedand

DoorLockedsymbolappearsonthedisplay.The

symbolofthestepfromwhichtheprogrammehas

startedappearsonthedisplay(Prewash,MainWash,

Rinse, Softener and Spin).

Progress of programme

Progress of a running programme is indicated on the

displaywithasetofsymbols.

Relevant symbol appears on the display at

the beginning of each programme step and all

symbols remain lit at the end of the programme.

The farthermost right symbol indicates the current

programme step.

Prewash

IfthePrewashauxiliaryfunctionisselected,Prewash

symbol appears on the display indicating that the

prewashstephasstarted.

Main Wash

MainWashsymbolindicatingthatthemainwashstep

has started appears on the display.

Rinse

Rinse symbol indicating that the rinsing step has

started appears on the display.

Softener

Softener symbol indicating that the softener step has

started appears on the display.

Spin

Appears at the beginning of the final spin step

and remains lit during Spin and Pump special

programmes.

 Ifthemachinedoesnotpasstothespinning

step, Rinse Hold function might be active or the

automatic unbalanced load detection system

might be activated due to the unbalanced

distribution of the laundry in the machine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

whenthewaterlevelisunsuitable.

DoorLockedsymbolappearswhentheloadingdoor

islocked.Thissymbolwillflashuntiltheloadingdoor

becomesreadytoopenwhenprogrammecompletes

orthemachineispaused.Donotforcetoopenthe

loadingdoorinthisstep.Symboldisappearswhenthe

doorisreadytoopen.Youcanopenthedoorwhen

the symbol disappears.

Changing the selections after

programme has started

Switching the machine to pause mode

PresstheStart/Pause/Cancelbuttontoswitchthe

machine to pause mode. Pause symbol appears on

the display indicating that the machine is paused. Start

symbol disappears.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehasreached,

you may cancel or activate the auxiliary functions; see,

"Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

Adding or taking out laundry

PresstheStart/Pause/Cancelbuttontoswitchthe

machinetopausemode.Theprogrammefollow-up

lightoftherelevantstepduringwhichthemachine

wasswitchedintothepausemodewillflash. Wait

untiltheLoadingDoorcanbeopened.Openthe

LoadingDoorandaddortakeoutthelaundry.Close

theLoadingDoor.Makechangesinauxiliaryfunctions,

temperature and speed settings if necessary. Press

Start/Pause/Cancelbuttontostartthemachine.

 Theloadingdoorwillnotopenifthewater

temperatureinthemachineishighorthewater

level is above the door opening.

Child Lock

UseChildLockfunctiontopreventchildrenfrom

tamperingwiththemachine.Thusyoucanavoidany

changes in a running programme.

 YoucanswitchonandoffthemachinewithOn

/OffbuttonwhentheChildLockisactive.When

youswitchonthemachineagain,programmewill

resumefromwhereithasstopped.

To activate the Child Lock:

Press and hold 2

and 4

Auxiliary Function buttons

for 3 seconds. “Con” appears on the display.

 Samephrasewillappearonthedisplayifyou

pressanybuttonwhenChildLockisenabled.

To deactivate the Child Lock:

Press and hold 2

and 4

Auxiliary Function buttons

for 3 seconds. “COFF” appears on the display.

 Donotforgettodisablethechildlockatthe

endoftheprogrammeifitwasenabledbefore.

Otherwise,machinewillnotallowtoselectanew

programme.

Canceling the programme

PressandholdStart/Pause/Cancelbuttonfor3

seconds. Start symbol flashes. Symbol of the step

atwhichtheprogrammewascancelledremainslit.

"END" appears on the display and the programme is

cancelled.

 Ifyouwanttoopentheloadingdoorafteryou

have cancelled the programme but it is not

possibletoopentheloadingdoorsincethewater

level in the machine is above the loading door

opening, then turn the Programme Selection

knobtoPump+Spinprogrammeanddischarge

thewaterinthemachine.

Machine is in Rinse Hold mode

Spin symbol flashes and Pause symbol illuminates

whenthemachineisinRinseHoldmode.

Ifyouwanttospinyourlaundrywhenthemachineis

in this mode:

AdjustthespinspeedandpressStart/Pause/

Cancel button. Pause symbol disappears and Start

symbol appears. Programme resumes, discharges the

waterandspinsthelaundry.

Ifyouonlywanttodrainthewaterwithoutspinning:

JustpressStart/Pause/Cancelbutton.Pause

symbol disappears. Start symbol appears.

Programmeresumesanddischargesthewateronly.

End of programme

“End”appearsonthedisplayattheendofthe

programme. Symbols of the programme steps remain

lit. Auxiliary function, spin speed and temperature that

wereselectedatthebeginningoftheprogramme

remain selected.

BEKO WMB 91442 Seite 65

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info