Bedienungsanleitung BEKO WMB71642 (Seite 25 von 40) (Englisch)

556825

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Spin

Appears at the beginning of the final spin step

and remains lit during Spin and Pump special

programmes.

If the machine does not pass to the

spinning step, Rinse Hold function might

be active or the automatic unbalanced

load detection system might be activated

due to the unbalanced distribution of the

laundry in the machine.

Loading door lock

There is a locking system on the loading

door of the machine that prevents opening

of the door in cases when the water level is

unsuitable.

Door Locked symbol appears when the

loading door is locked. This symbol will flash

until the loading door becomes ready to open

when programme completes or the machine

is paused. Do not force to open the loading

door in this step. Symbol disappears when

the door is ready to open. You can open the

door when the symbol disappears.

Changing the selections after

programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to

switch the machine to pause mode. Pause

symbol appears on the display indicating

that the machine is paused. Start symbol

disappears.

Changing the speed and temperature

settings for auxiliary functions

Depending on the step the programme has

reached, you may cancel or activate the

auxiliary functions; see, "Auxiliary function

selection".

You may also change the speed and

temperature settings; see, "Spin speed

selection" and "Temperature selection".

Adding or taking out laundry

1. Press the Start / Pause / Cancel button to

switch the machine to pause mode. The

programme follow-up light of the relevant

step during which the machine was

switched into the pause mode will flash.

2. Wait until the Loading Door can be

opened.

3. Open the Loading Door and add or take

out the laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions,

temperature and speed settings if

necessary.

6. Press Start / Pause / Cancel button to

start the machine.

The loading door will not open if the water

temperature in the machine is high or the

water level is above the door opening.

Child Lock

Use Child Lock function to prevent children

from tampering with the machine. Thus

you can avoid any changes in a running

programme.

You can switch on and off the machine

with On / Off button when the Child

Lock is active. When you switch on the

machine again, programme will resume

from where it has stopped.

To activate the Child Lock:

Press and hold 2

and 4

Auxiliary Function

buttons for 3 seconds. “Con” appears on the

display.

Same phrase will appear on the display if

you press any button when Child Lock is

enabled.

To deactivate the Child Lock:

Press and hold 2

and 4

Auxiliary Function

buttons for 3 seconds. “COFF” appears on

the display.

Do not forget to disable the child lock

at the end of the programme if it was

enabled before. Otherwise, machine will

not allow to select a new programme.

Cancelling the programme

Press and hold Start / Pause / Cancel button

for 3 seconds. Start symbol flashes. Symbol

of the step at which the programme was

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMB71642 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info