Bedienungsanleitung BEKO WMB91442 LW (Seite 26 von 40) (Englisch)

556810

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Main Wash

Main Wash symbol indicating that the main

wash step has started appears on the

display.

Rinse

Rinse symbol indicating that the rinsing

step has started appears on the display.

Softener

Softener symbol indicating that the softener

step has started appears on the display.

Spin

Appears at the beginning of the final spin

step and remains lit during Spin and Pump

special programmes.

If the machine does not pass to the

spinning step, Rinse Hold function

might be active or the automatic

unbalanced load detection system

might be activated due to the

unbalanced distribution of the laundry

in the machine.

Loading door lock

There is a locking system on the loading

door of the machine that prevents opening

of the door in cases when the water level is

unsuitable.

Door Locked symbol appears when the

loading door is locked. This symbol will

flash until the loading door becomes ready

to open when programme completes or

the machine is paused. Do not force to

open the loading door in this step. Symbol

disappears when the door is ready to open.

You can open the door when the symbol

disappears.

Changing the selections after

programme has started

Switching the machine to pause mode

Press the Start / Pause / Cancel button to

switch the machine to pause mode. Pause

symbol appears on the display indicating

that the machine is paused. Start symbol

disappears.

Changing the speed and temperature

settings for auxiliary functions

Depending on the step the programme has

reached, you may cancel or activate the

auxiliary functions; see, "Auxiliary function

selection".

You may also change the speed and

temperature settings; see, "Spin speed

selection" and "Temperature selection".

Adding or taking out laundry

1. Press the Start / Pause / Cancel button

to switch the machine to pause mode.

The programme follow-up light of the

relevant step during which the machine

was switched into the pause mode will

flash.

2. Wait until the Loading Door can be

opened.

3. Open the Loading Door and add or

take out the laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions,

temperature and speed settings if

necessary.

6. Press Start / Pause / Cancel button to

start the machine.

The loading door will not open if the

water temperature in the machine is

high or the water level is above the

door opening.

Child Lock

Use Child Lock function to prevent children

from tampering with the machine. Thus

you can avoid any changes in a running

programme.

You can switch on and off the machine

with On / Off button when the Child

Lock is active. When you switch on the

machine again, programme will resume

from where it has stopped.

To activate the Child Lock:

Press and hold 2

and 4

Auxiliary

Function buttons for 3 seconds. “Con”

appears on the display.

Same phrase will appear on the display

if you press any button when Child

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMB91442 LW Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info