Bedienungsanleitung BEKO WMD 78144 (Seite 24 von 40) (Englisch)

457432

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Preparation

1. Turn the tap on completely. Check

that the hose is connected tightly.

2. Placethelaundryinthemachine.

3. Add detergent and softener.

Starting

1. Pressthe“On/Off”button.

2. Select the programme and the

temperature.

3. Ifdesired(accordingtoyour

machine’smodel):

– selectanyauxiliaryfunction,

– adjustthespinspeed,

– setthetimedelay,

4. Close the loading door.

5. Press“Start/Pause/Cancel”button.

The display shows the time remaining for

the programme to complete if time delay

is not set.

The display shows the time remaining for

the programme to start if the time delay

is set.

6. Check if the Door Locked Symbol

lights up on the screen.

TheDoorLockedSymbol(Figure3-13i)

will light up if time delay is not set.

TheDoorLockedSymbol(Figure3-13i)

will fade if time delay is set.

Cancelling a programme

1. Pressandholdthe“Start/Pause/

Cancel”buttonforabout3seconds;

the Start symbol will start flashing.

2. The machine can discharge all

the water or can take in water for

3 times at most to cool down the

clothes and complete discharging

process.

Adding more laundry

•

This is only possible under the

followingconditions:

– duringtimedelay,

 Youmayaddorremovelaundry

duringthetimedelay(untilthe

programmestarts).Atthebeginning

ofawashingcycle(machineallows

adding more laundry during a future

step only if the water level is low

enough to open the loading door or

if the temperature in the machine is

low).

In order to add laundry after the

start-upoftheprogramme:

1. Press“Start/Pause/Cancel”button.

2. Opentheloadingdoorandputin

more laundry.

3. Close the loading door.

4. Press“Start/Pause/Cancel”button.

Programme is in rinse hold mode

This process is shown with the

flashing spin symbol and the

standby symbol which is lit up.

If you wish to spin when the machine is

inthismode:

1. Adjust the spin speed.

2. Press“Start/Pause/Cancel”button.

The programme continues, pumps

out the water and spins.

3. The standby symbol fades out and

the start symbol lights up.

If you want to discharge the water

withoutspinning:

1. Press“Start/Pause/Cancel”button.

2. The standby symbol fades out and

the start symbol lights up.

3. The programme continues and only

pumps out the water.

Re-spinning the laundry

The control system for an unbalanced

load can pause the spinning in cases

when the distribution of the laundry in

the drum is not balanced.

Ifyouwanttore-spintheclothes:

1. Distribute the laundry in your

machine for a balanced load.

2. Select the spin programme.

3. Adjust the spin speed.

After the programme is finished

Programmeindicatorsymbolson

the screen will remain lit after the

programmeisfinished.“End”willappear

on the screen.

1. Opentheloadingdoorandtakeout

6 Quick instructions for daily use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WMD 78144 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info