Bedienungsanleitung BEKO WML 51021 (Seite 12 von 52) (Englisch, Französisch)

550068

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Starting the programme

Press Start / Pause button to start the programme.

Programmefollow-uplightshowingthestartupofthe

programme will turn on.

 Ifnoprogrammeisstartedornokeyispressed

within 1 minute during programme selection

process, the machine will switch to Pause mode

and the illumination level of the temperature,

speed and loading door indicator lights will

decrease.Otherindicatorlightsandindicators

willturnoff.OncetheProgrammeSelection

knob is rotated or any button is pressed,

indicator lights and indicators will turn on again.

Child Lock

Usechildlockfunctiontopreventchildrenfrom

tampering with the machine. Thus you can avoid any

changes in a running programme.

 IftheProgrammeSelectionknobisrotated

when the child lock is active, the lights on the

and 2

auxiliary function buttons will blink

3 times. The child lock does not allow any

change in the programmes and the selected

temperature, speed and auxiliary functions.

Even if another programme is selected with the

Programme Selection knob while the Child Lock

is active, previously selected programme will

continue running.

When the Child Lock is active and the machine

is running, you can switch the machine to Pause

mode without deactivating the Child Lock by

turningtheProgrammeSelectionknobtoOn

/Offposition.WhenyouturntheProgramme

Selection knob afterwards, the programme will

resume.

To activate the Child Lock:

Press and hold 1

and 2

Auxiliary Function buttons

for 3 seconds. The lights on the 1

and 2

Auxiliary

Function buttons will flash while you keep the buttons

pressed for 3 seconds.

To deactivate the Child Lock:

Press and hold 1

and 2

auxiliary function buttons

for 3 seconds while any programme is running. The

lights on the 1

and 2

Auxiliary Function buttons

will flash while you keep the buttons pressed for 3

seconds.

 Inadditiontothemethodabove,todeactivate

the Child Lock, switch the Programme Selection

knobtoOn/Offpositionwhennoprogrammeis

running, and select another programme.

When the power is restored after a power failure

or after your machine is unplugged and plugged

in again, the Child Lock will not be deactivated

when the machine resumes operating.

Progress of programme

Progress of a running programme can be followed

fromtheProgrammeFollow-upindicator.Atthe

beginning of every programme step, the relevant

indicator light will turn on and light of the completed

step will turn off.

You can change the auxiliary functions, speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make must

beinastepaftertherunningprogrammestep.Ifthe

change is not compatible, relevant lights will flash for

3 times.

 Ifthemachinedoesnotpasstothespinning

step,RinseHoldfunctionmightbeactiveorthe

automatic unbalanced load detection system

might be activated due to the unbalanced

distribution of the laundry in the machine.

Loading door lock

There is a locking system on the loading door of the

machine that prevents opening of the door in cases

when the water level is unsuitable.

Loading door light will start flashing when the

machine is switched to Pause mode. Machine

checksthelevelofthewaterinside.Ifthelevelis

suitable,LoadingDoorlightilluminatessteadilywithin

1-2minutesandtheloadingdoorcanbeopened.

Ifthelevelisunsuitable,LoadingDoorlightturnsoff

andtheloadingdoorcannotbeopened.Ifyouare

obligedtoopentheLoadingDoorwhiletheLoading

Doorlightisoff,youhavetocancelthecurrent

programme; see "Canceling the programme".

Changing the selections after

programme has started

Switching the machine to pause mode

Press the Start / Pause button to switch the machine

to pause mode while a programme is running.

The light of the step which the machine is in starts

flashingintheProgrammeFollow-upindicatorto

show that the machine has been switched to the

pause mode.

Also, when the loading door is ready to be opened,

LoadingDoorlightwillalsoilluminatecontinuouslyin

addition to the programme step light.

Changing the speed and temperature settings

for auxiliary functions

Dependingonthesteptheprogrammehasreached,

you may cancel or activate the auxiliary functions;

see, "Auxiliary function selection".

You may also change the speed and temperature

settings; see, "Spin speed selection" and

"Temperature selection".

 Ifnochangeisallowed,therelevantlightwill

flash for 3 times.

Adding or taking out laundry

Press the Start / Pause button to switch the machine

topausemode.Theprogrammefollow-uplight

of the relevant step during which the machine

was switched into the pause mode will flash.

WaituntiltheLoadingDoorcanbeopened.Open

theLoadingDoorandaddortakeoutthelaundry.

ClosetheLoadingDoor.Makechangesinauxiliary

functions, temperature and speed settings if

necessary. Press Start / Pause button to start the

machine.

Canceling the programme

To cancel the programme, turn the Programme

Selection knob to select another programme.

Previous programme will be canceled. End /

Cancel light will flash continuously to notify that the

programme has been canceled.

BEKO WML 51021 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info