628881
51
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
51 / EN
Washing Machine / User’s Manual
Then, depending on the model of the product, "Rinse Hold" and "No Spin" options appear on the
display.
C
Spin Speed Adjustment button only serves for decreasing the spin speed.
Rinse Hold option is indicated with “ı_ı” symbol and No Spin option is indicated with “_” symbol.
If you are not going to unload your laundry immediately after the programme completes, you can use
Rinse Hold function in order to prevent them from getting wrinkled when there is no water in the
machine.
This function holds the laundry in the final rinsing water.
88:88
88
C
0
If you want to spin your laundry after the Rinse Hold function:
- Adjust the Spin Speed.
- Press Start / Pause / Cancel button. The programme resumes. Machine spins the laundry by
discharging the water.
Rnse Hold
If you are not going to unload your clothes immediately after the programme completes, you can
use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start / Pause button after this process
if you want to drain the water without spinning your laundry. Programme will resume and complete
after draining the water.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained, laundry is spun and the programme is completed.
If you want to discharge the water at the end of the programme without spinning, use No Spin
function.
88:88
88
C
0
C
No change can be made in programmes where spin speed adjustment is not allowed.
You can change the spin speed after the washing starts if the washing steps allow it. Changes
cannot be made if the steps do not allow it.
4.3.8 Auxlary functon selecton
Select the desired auxiliary functions before starting the programme. Whenever a programme is
selected, frames of the auxiliary function symbol that can be selected together with it illuminates.
And when you select an auxiliary function, the interior area of the auxiliary function symbol also
starts to illuminate.
1888
88:88
88
C
0
C
Frame of the auxiliary function symbol that cannot be selected with the current programme does not illuminate.
51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BEKO WTE 10735 XC0ST wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BEKO WTE 10735 XC0ST

BEKO WTE 10735 XC0ST Bedienungsanleitung - Holländisch, Französisch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info