Bedienungsanleitung BEKO WTE10736XBMN1 (Seite 22 von 80) (Deutsch, Englisch)

757484

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

22 / EN Washing Machine / User’s Manual

• Extra Rinse

This function is selected when the auxiliary function button 2 is pressed and held for 3 seconds.

This function enables the product to make another rinsing in addition to the one already made after the main

wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent

remnants on the laundry can be reduced.

• Child lock

Use Child Lock function to prevent children from tampering with the machine. Thus you can avoid any changes

in a running programme.

CYou can switch on and off the machine with On / Off button when the Child Lock is active. When you switch on the machine

again, programme will resume from where it has stopped.

When the Child Lock is enabled, an audio warning will be given if the buttons are pressed. Audio warning will be cancelled if

the buttons are pressed five times consecutively.

To activate the Child Lock:

Press and hold Auxiliary Function button 3 for 3 seconds. After the countdown as “3-2-1" on the

display is over, child lock symbol appears on the display. When this warning is displayed, you can release the

Auxiliary Function button 3.

To deactivate the Child Lock:

Press and hold Auxiliary Function button 3 for 3 seconds. After the countdown as “3-2-1" on the display

is over, child lock symbol disappears.

• Bluetooth 3’’

You can use the bluetooth connection function to pair your machine with your smart device. This way, you can use your smart

device to get information about your machine and control it.

To activate bluetooth connection:

Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed,

and then Bluetooth icon will appear on the display. Release Remote Control function button. The bluetooth

icon will flash while the product is pairing with smart device. If connection is successful, icon will remain on.

To deactivate bluetooth connection:

Press and hold Remote Control function button for 3 seconds. Countdown “3-2-1” will be displayed,

and then Bluetooth icon will disappears on the display.

CFirst setup of the HomeWhiz application must be complete for the bluetooth connection to be activated. After setup, pressing

the remote control function button while the knob is at Download Programme/Remote Control position will automatically

activate the bluetooth connection.

4.3.9 End Time

Time display

Remaining time for the completion of the programme while it is running is displayed as “01:30” in hours and

minutes format.

CProgramme time may differ from the values in section "Programme and consumption table" depending on the water

pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected

and the changes at the mains voltage.

With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End

Time button, the programme's estimated ending time is displayed. If the End Time is set, End Time indicator

is illuminated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTE10736XBMN1 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO WTE10736XBMN1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info