Bedienungsanleitung BEKO WTIK76121 (Seite 21 von 44) (Englisch)

758343

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

21 / EN Washing Machine / User’s Manual

4.3.11 End Time Adjustment

The End Time Adjustment function allows you to

set the end time of the programme up to 19 hours.

You can increase this time by 1-hour intervals.

INFORMATION

• Please do not use liquid detergent if you

have selected the End Time Adjustment

function. Stains might remain on the clothes.

1. Open the loading door, place the laundry

and add detergent, etc.

2. Select the washing programme,

temperature, spin speed and, if required,

the auxiliary functions.

3. Press the

End Time Adjustment

button and

select the desired time.

4. Press the Start/Pause button. The delayed end

time you have set will be displayed. Countdown

will start for delayed end. On the display, “_” will

move up and down next to the delayed end time.

INFORMATION

• If the programme has not started,

you can add laundry into the machine

during the delayed end time.

5. At the end of the countdown, duration of

the selected programme will be displayed.

“_” will disappear and the selected

programme will start.

Changing the delayed end time

If you want to change the time during countdown:

Turn the programme selection knob to cancel the

delayed end time function, and then set the desired

time again.

1. Press the

End Time Adjustment

button. When

pressed for the first time, the programme

duration will be rounded up to the closest

whole number time. Each following press will

increase the time by an hour.

2. If you want to decrease the delayed end

time, press the

End Time Adjustment

button

consecutively until the desired time is displayed.

Cancelling the delayed end function

If you want to cancel the delayed end time

countdown and start the programme immediately:

1. Set the Programme Selection knob to any

programme. This way, the Delayed End time

will be cancelled. The End/Cancel light will

flash continuously.

2. Then, select the programme you want to run

again.

Press Start/Pause button to start the programme.

4.3.12 Starting the programme

1. Press Start/Pause button to start the programme.

2. Programme follow-up light showing the

startup of the programme will turn on.

INFORMATION

• If no programme is started or no key is

pressed within 10 minutes during the

programme selection process, the display

lights will go off. Once the Programme

Selection knob is turned or any button is

pressed, display lights will turn on again.

4.3.13 Progress of programme

Progress of a running programme can be

followed from the Programme Follow-up

indicator. At the beginning of each programme

step, the relevant indicator light will turn on.

INFORMATION

• If the “Anti-crease+” auxiliary function

has been selected, “End” LED and “Anti-

crease+” LED will be on at the same

time while this step is continuing.

• To end the programme while the “Anti-

crease+” step is running, simply press any

button or turn the programme selection knob.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTIK76121 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info