Bedienungsanleitung BEKO WTK72011 (Seite 38 von 44) (Englisch)

758324

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

38 / EN

Washng Machne / User Manual

Problem Reason Soluton

Detergent residue in the

detergent drawer. (**)

Detergent s put n wet drawer. • Dry the detergent drawer before

puttng n detergent.

Detergent has gotten damp. • Keep detergents closed n an

envronment free of humdty and

do not expose them to excessve

temperatures.

Water pressure s low. • Check the water pressure.

The detergent n the man wash compartment got

wet whle takng n the prewash water. Holes of

the detergent compartment are blocked.

• Check the holes and clean f they are

clogged.

There s a problem wth the detergent drawer

valves.

• Call the Authorsed Servce Agent.

Detergent mght be mxed wth the softener. • Do not mx the softener wth

detergent. Wash and clean the

dspenser wth hot water.

Regular drum cleanng s not appled. • Clean the drum regularly. For ths,

please see 4.7.2.

Too much foam forms in the

machine. (**)

Improper detergents for the washng machne are

beng used.

• Use detergents approprate for the

washng machne.

Excessve amount of detergent s used. • Use only suffcent amount of

detergent.

Detergent was stored under mproper condtons. • Store detergent n a closed and dry

locaton. Do not store n excessvely

hot places.

Some meshed laundry such as tulle may foam too

much because of ther texture.

• Use smaller amounts of detergent for

ths type of tem.

Detergent s put n the wrong compartment. • Put the detergent n the correct

compartment.

Softener s beng taken early. • There may be problem n the valves

or n the detergent dspenser. Call the

Authorsed Servce Agent.

Foam is overflowing from

the detergent drawer.

Too much detergent s used. • Mx 1 tablespoonful softener and

½ l water and pour nto the man

wash compartment of the detergent

drawer.

• Put detergent nto the machne

sutable for the programmes and

maxmum loads ndcated n the

“Programme and consumpton table”.

When you use addtonal chemcals

(stan removers, bleachs and etc),

reduce the amount of detergent.

Laundry remains wet at the

end of the programme. (*)

Excessve foam mght have occurred and

automatc foam absorpton system mght have

been actvated due to too much detergent usage.

• Use recommended amount of

detergent.

(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent

any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean the drum regularly. See 4.7.2

ACAUTION:

If you cannot eliminate the problem although you follow the instructions in this

section, consult your dealer or the Authorised Service Agent. Never try to repair a nonfunctional

product yourself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTK72011 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info