Bedienungsanleitung BEKO WTK94121 (Seite 23 von 32) (Englisch)

758311

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

23 / EN Washing Machine / User’s Manual

Changing the auxiliary function, speed and

temperature

Depending on the step the programme has

reached, you can cancel or select auxiliary

functions. See “Auxiliary function selection”.

You can also change the speed and

temperature settings. See "Spin speed

selection" and "Temperature selection".

INFORMATION

• If no change is allowed, the relevant light

will flash 3 times.

Adding and removing laundry

1. Press the “Start/Pause” button to pause the

machine. The programme follow-up light of

the relevant step during which the machine

was switched into the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the loading door and add or take out

laundry.

4. Close the loading door.

5. Make changes in auxiliary functions,

temperature and speed settings if necessary.

6. Press the “Start/Pause” button to start the

machine.

4.3.16 Cancelling the programme

To cancel the programme, turn the Programme

Selection knob to select another programme.

Previous programme will be cancelled. End/

Cancel light will flash continuously to notify that

the programme has been canceled.

When you turn the Programme Selection knob,

the machine will end the programme but will not

discharge the water inside. When you select

and start a new programme, the newly selected

programme will start depending on the step

the previous programme was canceled in. For

example, the machine may take in additional

water or continue to wash with the water inside.

INFORMATION

• Depending on the step where the

programme was canceled in, you may

have to add detergent and softener again

for the programme you have selected

anew.

4.3.17 End of programme

At the end of the programme, “End” will be

displayed.

1. Wait until the light of the loading door goes

off completely.

2. Switch the programme selection knob to

On/Off to switch off the machine.

3. Take out your laundry and close the loading

door. Your machine is now ready for the

next washing cycle.

4.3.18 Your machine has the

"Pause Mode" function.

After using the On/Off button to switch on the

machine, if you do not start any programme in

the selection step or do not perform anything

else, or if you do not do anything in 10 minutes

after the selected programme has ended, the

machine will automatically switch to energy

saving mode. Also, if your product has a display

that shows programme time, this display will

completely turn off. If you turn the Programme

Selection knob or touch any button, the lights

and the display will switch back to the previous

position. The selections you make when exiting

the energy efficiency mode may change. Check

if your selections are correct before starting the

programme. If necessary, make adjustments

again.This is not an error.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTK94121 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info