Bedienungsanleitung BEKO WTL94131 (Seite 22 von 32) (Englisch)

758330

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

22 / EN Washing Machine / User’s Manual

You can change the auxiliary functions, speed

and temperature settings without stopping the

programme flow while the programme is running.

To do this, the change you are going to make

must be something that will be carried out after

the programme step that is running. If the change

is not suitable, relevant lights will flash 3 times.

INFORMATION

• If the machine does not proceed to the

spinning step, the Rinse Hold function

might be active or the automatic

unbalanced load detection system might be

activated due to the unbalanced distribution

of the laundry in the machine.

4.3.14 Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the loading

door in cases when the water level is unsuitable.

Loading door light will start flashing when the

machine is switched to Pause mode. The machine

checks the level of the water inside. If the level is

suitable, the loading door light will turn off and the

loading door can be opened within 1-2 minutes.

If the level is unsuitable, the loading door light

will remain on and the loading door cannot be

opened. If you are obliged to open the loading

door while the Loading Door light is on, you

must cancel the current programme. See

"Cancelling the programme"

Opening the loading door in case of power

failure:

INFORMATION

• In case of a power failure, you can use the

loading door emergency handle under the

pump filter lid to manually open the loading

door.

WARNING!

• Before opening the loading door, make sure

that there is no water in the machine to

avoid flooding.

•

Open the pump filter lid.

•

Release the loading door emergency

handle at the back of the filter lid.

•

Pull down the loading door emergency

handle to open the loading door. After

opening the door, return the emergency

handle to its original position.

•

If you cannot open the loading door,

try pulling down the handle again.

4.3.15 Changing the selections

after programme has started

Switching the machine to pause mode

Press the Start/Pause to switch the machine

to pause mode while a programme is running.

The light of the current programme will flash on

the Programme Follow-up indicator, indicating

that the machine has switched to pause mode.

Also, when the loading door is ready to be

opened, the Loading Door light will turn off in

addition to the programme step light.

Changing the auxiliary function, speed and

temperature

Depending on the step the programme has

reached, you can cancel or select auxiliary

functions. See “Auxiliary function selection”.

You can also change the speed and

temperature settings. See "Spin speed

selection" and "Temperature selection".

INFORMATION

• If no change is allowed, the relevant light

will flash 3 times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTL94131 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info