Bedienungsanleitung BEKO WTV 8712 XAW (Seite 21 von 64) (Deutsch, Englisch)

676631

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

21 / EN

Washing Machine / User’s Manual

Changing the auxiliary function, speed and temperature

Depending on the step the programme has reached, you can cancel or select the auxiliary functions. See,

"Auxiliary function selection".

You can also change the speed and temperature settings. See, "Spin speed selection" and "Temperature

selection".

If no change is allowed, the relevant light will flash 3 times.

Adding or taking out laundry

1. Press Start / Pause button to switch the machine to pause mode. The programme follow-up light of the

relevant step during which the machine was switched into the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the Loading Door and add or take out the laundry.

4. Close the Loading Door.

5. Make changes in auxiliary functions, temperature and speed settings if necessary.

6. Press Start / Pause button to start the machine.

4.3.16 Cancelling the programme

To cancel the programme, turn the Programme Selection knob to select another programme. Previous

programme will be cancelled. End / Cancel light will flash continuously to notify that the programme has been

canceled.

Your machine will end the programme when you turn the Programme Selection knob; however, it does not

drain the water inside. When you select and start a new programme, the newly selected programme will start

depending on the step the previous programme was canceled in. For example, it may take in additional water

or continue to wash with the water inside.

Depending on the step where the programme was canceled in, you may have to put detergent and softener again for the

programme you have selected anew.

4.3.17 End of programme

“End” appears on the display at the end of the programme.

1. Wait until the loading door light illuminates steadily.

2. Press On / Off button to switch off the machine.

3. Take out your laundry and close the loading door. Your machine is ready for the next washing cycle.

4.3.18 Your machine features "Standby Mode".

After you switch on your machine with On-Off button, if no programme is started or no other procedure is

performed at the selection step or no action is taken within approx. 2 minutes after the selected programme

ends, your machine will switch to energy saving mode automatically. The brightness of the indicator lights

will decrease. Also, if your product has a display that shows programme time, this display will be completely

turned off. If you turn the Programme Selection knob or touch any button, lights and display will switch back

to previous condition. The selections which you make when exiting from the energy efficiency may change.

Please check the correctness of your selections before starting the programme. If necessary, please make

your settings again. This is not an error.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTV 8712 XAW Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO WTV 8712 XAW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info