Bedienungsanleitung BEKO WTV7712BLS1 (Seite 25 von 56) (Deutsch, Englisch)

757506

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

25 / EN Washing Machine / User Manual

Washing machine does not rinse well.

• The amount, brand and storage conditions of the detergent

used are inappropriate. >>>Use a detergent appropriate

for the washing machine and your laundry. Keep

detergents closed in an environment free of humidity and

do not expose them to excessive temperatures.

• Detergent was put in the wrong compartment. >>>If

detergent is put in the prewash compartment although

prewash cycle is not selected, the product can take this

detergent during rinsing or softener step. Put the detergent

in the correct compartment.

• Pump filter is clogged. >>>Check the filter.

• Drain hose is folded. >>>Check the drain hose.

Laundry became stiff after washing. (**)

• Insufficient amount of detergent is used. >>>Using

insufficient amount of detergent for the water hardness

can cause the laundry to become stiff in time. Use

appropriate amount of detergent according to the water

hardness.

• Detergent was put in the wrong compartment. >>>If

detergent is put in the prewash compartment although

prewash cycle is not selected, the product can take this

detergent during rinsing or softener step. Put the detergent

in the correct compartment.

• Detergent was mixed with the softener. >>>Do not mix

the softener with detergent. Wash and clean the drawer

with hot water.

Laundry does not smell like the softener. (**)

• Detergent was put in the wrong compartment. >>>If

detergent is put in the prewash compartment although

prewash cycle is not selected, the product can take this

detergent during rinsing or softener step. Wash and clean

the drawer with hot water. Put the detergent in the correct

compartment.

• Detergent was mixed with the softener. >>>Do not mix

the softener with detergent. Wash and clean the drawer

with hot water.

Detergent residue in the detergent drawer. (**)

• Detergent was put in wet drawer. >>>Dry the detergent

drawer before putting in detergent.

• Detergent has gotten damp. >>>Keep detergents closed in

an environment free of humidity and do not expose them to

excessive temperatures.

• Water pressure is low. >>>Check the water pressure.

• The detergent in the main wash compartment got wet

while taking in the prewash water. Holes of the detergent

compartment are blocked. >>>Check the holes and clean

if they are clogged.

• There is a problem with the detergent drawer valves.

>>>Call the Authorised Service Agent.

• Detergent was mixed with the softener. >>>Do not mix

the softener with detergent. Wash and clean the drawer

with hot water.

• Regular drum cleaning is not applied. >>>Clean the drum

regularly. For this procedure, please see "Cleaning the

loading door and the drum".

Too much foam forms inside the product. (**)

• Improper detergents for the washing machine is used.

>>>Use detergents appropriate for the washing machine.

• Excessive amount of detergent is used. >>>Use only

sufficient amount of detergent.

• Detergent was stored under improper conditions. >>>Store

detergent in a closed and dry location. Do not store in

excessively hot places.

• Some meshed laundry such as tulle may foam too much

because of their texture. >>>Use smaller amounts of

detergent for this type of item.

• Detergent was put in the wrong compartment. >>>Put the

detergent in the correct compartment.

• Softener is being taken early by the product. >>>There

may be problem in the valves or in the detergent drawer.

Call the Authorised Service Agent.

Foam is overflowing from the detergent drawer.

• Too much detergent is used. >>>Mix 1 tablespoonful

softener and ½ l water and pour into the main wash

compartment of the detergent drawer.

>>>Put detergent into the product suitable for the

programmes and maximum loads indicated in the

“Programme and consumption table”. When you use

additional chemicals (stain removers, bleaches and etc.),

reduce the amount of detergent.

Laundry remains wet at the end of the programme. (*)

• Excessive foam has occurred and automatic foam

absorption system has been activated due to too much

detergent usage. >>>Use recommended amount of

detergent.

(*) The product does not switch to spinning

step when the laundry is not evenly distributed

in the drum to prevent any damage to the

product and to its surrounding environment.

Laundry should be rearranged and re-spun.

(**) Regular drum cleaning is not applied. Clean

the drum regularly. See 4.4.2

WARNING

• If you cannot eliminate the problem

although you follow the instructions in

this section, consult your dealer or the

Authorised Service Agent. Never try to

repair a nonfunctional product yourself.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTV7712BLS1 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO WTV7712BLS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info