Bedienungsanleitung BEKO WTV9725XCW1 (Seite 19 von 28) (Englisch)

816201

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

19 / EN Washing Machine / User Manual

4.3.14 Loading door lock

There is a locking system on the loading door of

the machine that prevents opening of the loading

door in cases when the water level is unsuitable.

Loading door light will start flashing when the

machine is switched to Pause mode. The machine

checks the level of the water inside. If the level is

suitable, the loading door light will turn off and the

loading door can be opened within 1-2 minutes.

If the level is unsuitable, the loading door light

will remain on and the loading door cannot be

opened. If you are obliged to open the loading

door while the Loading Door light is on, you

must cancel the current programme. See

"Cancelling the programme"

Opening the loading door in case of power

failure:

INFORMATION

• In case of a power failure, you can use the

loading door emergency handle under the pump

filter lid to manually open the loading door.

WARNING!

• Before opening the loading door, make sure that

there is no water in the machine to avoid flooding.

Water may be hot and could cause scalding.

•

Turn off and unplug the appliance.

•

Open the pump filter lid.

•

Remove the loading door emergency

handle behind the filter cover with a tool.

•

Open the loading door by pulling the loading

door emergency handle downwards.

•

Try to pull the handle downwards again

if the loading door is not opened.

•

Bring the loading door emergency

handle to its original position after

opening the loading door.

4.3.15 Changing the selections

after programme has started

Switching the machine to pause mode

Press the Start/Pause to switch the machine

to pause mode while a programme is running.

The light of the current programme will flash on

the Programme Follow-up indicator, indicating

that the machine has switched to pause mode.

Also, when the loading door is ready to be

opened, the Loading Door light will turn off in

addition to the programme step light.

Changing the auxiliary function, speed and

temperature

Depending on the step the programme has

reached, you can cancel or select auxiliary

functions. See “Auxiliary function selection”.

You can also change the speed and

temperature settings. See "Spin speed

selection" and "Temperature selection".

INFORMATION

• If no change is allowed, the relevant light

will flash 3 times.

Adding and removing laundry

1. Press the “Start/Pause” button to pause the

machine. The programme follow-up light of

the relevant step during which the machine

was switched into the pause mode will flash.

2. Wait until the Loading Door can be opened.

3. Open the loading door and add or take out

laundry.

4. Close the loading door.

5. Make changes in auxiliary functions,

temperature and speed settings if necessary.

6. Press the “Start/Pause” button to start the

machine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WTV9725XCW1 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO WTV9725XCW1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info