Bedienungsanleitung BEKO WUV75420W (Seite 29 von 92) (Deutsch, Englisch)

816198

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

EN / 29

cancelled or the step is complete. If the

function is not cancelled, it will be active in

the subsequent washing cycles as well.

• Extra Rinsing

This function can be selected by pressing

and holding the related auxiliary function

button for 3 seconds.

This function enables the product to make

additional rinsing in addition to the one

already made after the main wash. Thus,

the risk for sensitive skins (babies, allergic

skins, etc.) to be effected by the minimal

detergent remnants on the laundry can be

reduced.

• Child Lock

Use Child Lock function to prevent children

from tampering with the machine. Thus you

can avoid any changes in a running pro-

gramme.

You can switch on and off the ma-

chine with On / Off button when the

Child Lock is active. When you

switch on the machine again, pro-

gramme will resume from where it

has stopped.

When the Child Lock is enabled, an

audio warning will be given if the

buttons are pressed. Audio warning

will be cancelled if the buttons are

pressed five times consecutively.

To activate the child lock:

Press and hold the related auxiliary func-

tion button for 3 seconds. After the count-

down as “3-2-1" on the display is over, Child

Lock symbol appears on the display. When

this warning is displayed, you can release

the Auxiliary Function button 3.

To deactivate the child lock:

Press and hold the related auxiliary func-

tion button for 3 seconds. After the count-

down as “3-2-1" on the display is over, Child

Lock symbol disappears.

• Bluetooth

You can use the bluetooth connection func-

tion to pair your machine with your smart

device. This way, you can use your smart

device to get information about your ma-

chine and control it.

To activate bluetooth connection:

Press and hold Remote Control function

button for 3 seconds. Countdown “3-2-1”

will be displayed, and then Bluetooth icon

will appear on the display. Release Remote

Control function button. The bluetooth icon

will flash while the product is pairing with

smart device. If connection is successful,

icon will remain on.

To deactivate bluetooth connection:

Press and hold Remote Control function

button for 3 seconds. Countdown “3-2-1”

will be displayed, and then Bluetooth icon

will disappears on the display.

First setup of the HomeWhiz applic-

ation must be complete for the

bluetooth connection to be activ-

ated. After setup, pressing the re-

mote control function button while

the knob is at Download Pro-

gramme/Remote Control position

will automatically activate the

bluetooth connection.

6.9 End Time

Time display

When the end time function is selected, the

remaining time until the programme starts

is shown in hours such as 1h, 2h, and the

remaining time to complete the programme

after your programme starts is shown in

hours and minutes as in the 01:30 example.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BEKO WUV75420W Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BEKO WUV75420W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info