777020

Beldray BEL0207 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/10
Nächste Seite
THE SCIENCE
BEHIND CLEAN
Steam Station
Instruction Manual
www.beldray.com
BEL0207 Steam Station
2
Safety warnings
When using electrical appliances basic safety precautions should always
be followed.
Check that the voltage indicated on the rating plate corresponds with
that of the local network before connecting the appliance to the mains
power supply.
Children aged from 8 years and people with reduced physical, sensory
or mental capabilities or lack of experience and knowledge can use
this appliance, only if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the
hazards involved.
Children should be supervised to ensure that they do not play with
the appliance.
Children should not perform cleaning or user maintenance.
This product is not a toy.
This appliance contains no user serviceable parts. If the power supply cord,
plug or any part of the appliance is malfunctioning, if there is any leakage or
if it has been dropped or damaged, only a qualified electrician should carry
out repairs. Improper repairs may place the user at risk of harm.
Keep the appliance and its power supply cord out of reach of children.
Keep the appliance and its power supply cord away from heat or sharp
edges that could cause damage.
Keep the power supply cord away from any parts of the appliance that
may become hot during use.
Keep the appliance away from other heat emitting appliances.
Do not immerse the appliance in water or any other liquid.
Do not operate the appliance with wet hands.
Do not leave the appliance unattended whilst connected to the mains
power supply.
Do not remove the appliance from the mains power supply by pulling
the cord; switch it off and remove the plug by hand.
Do not pull or carry the appliance by its power supply cord.
Do not direct steam at people or animals.
Do not use the appliance for anything other than its intended use.
Do not use any accessories other than those supplied.
Do not use this appliance outdoors.
THE SCIENCE
BEHIND CLEAN BEL0207 Steam Station 3
Do not touch any sections of the appliance that may become hot or the
heating components of the appliance, as this could cause injury.
Always unplug the appliance after use and before any cleaning or
user maintenance.
Always ensure that the appliance has cooled fully after use before
performing any cleaning or maintenance or storing away.
Always use the appliance on a stable, heat-resistant surface, at a height
that is comfortable for the user.
Use of an extension cord with the appliance is not recommended.
This appliance should not be operated by means of an external timer or
separate remote control system.
This appliance is intended for domestic use only. It should not be used
for commercial purposes.
Warning: Keep the appliance away from flammable materials.
Warning: Danger of scalding.
Caution: The appliance emits very hot steam; always exercise extreme
caution during use.
Caution: Hot Surface.
Getting Started
Remove the appliance from the box.
Remove all of the packaging from the appliance.
Place the packaging inside of the box and either store or dispose of safely.
In the Box
Steam Station
Instruction Manual
Features
2000 W power
Steam ready
700 ml removable water tank
Continuous refill system
Low level water indicator
Continuous and vertical steam functions
1.9 m power cord
Cord storage
Stainless steel soleplate
Description of parts
BEL0207 Steam Station
4
1. Iron
2. Stainless steel sole plate
3. Continuous steam jet button
4. Steam button lock
5. Trigger/Steam button
6. Temperature control dial
7. Heat ready indicator light
8. Low water level
indicator light
9. On/Off switch
10. Power indicator light
11. Cord storage lock
12. Steam hose
13. Base unit
14. Removable water tank
15. Water fill entrance
1
2
5 3
4
6
7
11
14
15
9
13
12
10
8
THE SCIENCE
BEHIND CLEAN
Instructions for Use
Ensure that the Steam Station is unplugged from the mains power supply.
Remove the water tank from the Steam Station main body by grasping the water fill entrance
and gently but firmly pulling it out. Fill the water tank with tap water up to the Max. level marked
on the front of the tank. Once full, replace the water tank back onto the Steam Station main
body until it clicks into position.
Connect the Steam Station to the mains power supply.
To begin using the Steam Station, press the ‘On/Off’ switch. The power indicator light will flash
to indicate that the boiler is heating up.
Select the temperature of the Steam Station by turning the temperature control dial on the iron
to the desired heat setting.
When the Steam Station has reached the correct temperature, the power indicator light will
stop flashing and will remain lit; when the heat ready indicator light turns off, the Steam Station is
ready for use.
If the low water level indicator light flashes and an audible noise is emitted, the water level in the
tank is too low and the water tank will need refilling according to the instructions provided.
Note: It is possible to fill the water tank whilst it is still attached to the Steam Station main unit
by directly pouring water into the water fill entrance.
Note: This Steam Station is designed for use with tap water. If the water in your area is
particularly hard, please use demineralised water to protect the internal parts of the Steam
Station from limescale build-up.
Note: If the temperature required for a particular garment is not specified, it is recommended
to iron at the lowest heat setting and then increase if necessary, in order to avoid damage to
the material.
Tip: Before use, separate the clothes to be ironed by ironing temperature, starting at the coolest
setting, as the iron will heat up faster than it will cool down.
Steam Ironing
When steam ironing for the first time, it is recommended to iron a plain cloth to test that the
iron is working at the correct temperature.
To use the steam setting, press the trigger/steam button on the underside of the iron handle.
This will provide steam up until the button is released. The continuous steam jet button can be
locked down in order to provide continuous steam by sliding the steam button lock towards the
rear of the iron.
Vertical Steam Ironing
Vertical steam ironing is especially useful when removing creases from hanging fabrics, such as
curtains, wall hangings and certain clothes.
To use the vertical steam function, hold the iron approximately 1–2 cm away from the fabric to
be steamed, and then press and hold the steam button on the underside of the iron handle and
direct the iron soleplate at the area to be steamed.
BEL0207 Steam Station 5
Ironing Guide
Fabric Temperature Control
Dial Setting
Instructions
Acetate
Nylon
Acrylic
• Do not use steam to iron these
fabrics.
Always follow the instructions on
the garment labelling.
As a guide, these fabrics usually
require a very low heat setting.
Polyester
Rayon
• Do not use steam to iron these
fabrics.
Iron the garments inside out to
protect the surface of the fabric
and select the lowest heat setting.
Silk •• Do not use steam to iron these
fabrics.
Iron the garments inside out to
protect the surface of the fabric.
Wool
Light cotton
Light linen
•• These fabrics can be ironed using
the steam setting.
Iron the garments inside out to
protect the surface of the fabric.
To avoid creating a shiny finish, it
is recommended to place a thin
cloth over the fabric to be ironed.
Cotton
Fine linen
Starched fabric
••• These fabrics can be ironed using
the steam setting.
Before ironing, lightly dampen
the fabric.
Heavier and starched fabrics
can be ironed directly onto the
outside of the fabric. Darker
colours and embroidered
garments should be ironed inside
out to protect the surface of the
fabric.
Linen ••• These fabrics can be ironed using
the steam setting.
Use plenty of steam.
Darker colours should be ironed
inside out to protect the surface
of the fabric.
Iron lapels on the right side for a
better finish.
BEL0207 Steam Station
6
THE SCIENCE
BEHIND CLEAN
Cleaning and maintenance
Always unplug the Steam Station from the mains power supply before attempting any cleaning
or maintenance.
Ensure that the Steam Station has completely cooled before cleaning, as it gets extremely hot
during use.
Wipe the Steam Station and sole plate clean with a soft, damp cloth.
Always empty the water tank after each use.
Do not use abrasive cloths or scourers to clean the Steam Station or sole plate.
Never immerse the Steam Station in water or any other liquid.
Storage
Before storing the Steam Station, ensure that the water tank has been emptied and that it is cool,
clean and dry.
Ensure that the power supply cord is correctly stored in the cord storage on the base of the
Steam Station. The power supply cord will wrap around the Steam Station main body and can be
locked into position once wrapped by pressing the cord storage lock downwards.
Never wrap the cord tightly around the Steam Station; wrap it loosely to avoid causing damage.
Store in a clean, dry place.
Specifications
Product code: BEL0207
Voltage: 220 – 240 V AC
Frequency: 50 Hz
Power: 1830 – 2000 W
BEL0207 Steam Station 7
Connection to the mains
Please check that the voltage indicated on the product corresponds with your supply voltage.
Important
As the colours in the mains lead of this appliance
may not correspond with the coloured markings
identifying the terminals in your plug, please
proceed as follows:
The wires in the mains lead are coloured in
accordance with the following code:
Blue Neutral (N)
Brown Live (L)
Green/Yellow Earth ( )
FOR UK USE ONLY - Plug fitting details (where applicable).
The wire coloured BLUE is the NEUTRAL and must be connected to the terminal marked N or
coloured BLACK.
The wire coloured BROWN is the LIVE wire and must be connected to the terminal marked L or
coloured RED.
The wire coloured GREEN/YELLOW must be connected to the terminal marked with the letter E
or marked .
On no account must either the BROWN or the BLUE wire be connected to the
EARTH terminal ( ).
Always ensure that the cord grip is fastened correctly.
The plug must be fitted with a fuse of the same rating already fitted and conforming to BS 1362
and be ASTA approved.
If in doubt consult a qualified electrician who will be pleased to do this for you.
Non-rewireable mains plug
If your appliance is supplied with a non-rewireable plug fitted to the mains lead and should the fuse
need replacing, you must use an ASTA approved one (conforming to BS 1362 of the same rating).
If in doubt, consult a qualified electrician who will be pleased to do this for you.
If you need to remove the plug - DISCONNECT IT FROM THE MAINS and then cut it off the
mains lead and immediately dispose of it safely. Never attempt to re-use the plug or insert it into a
socket outlet as there is a danger of an electric shock.
THE SCIENCE
BEHIND HEAT Class I Wiring 9
UP Global Sourcing
Victoria Street, Manchester OL9 0DD. UK.
If this product does not reach you in an acceptable condition please contact our Customer
Services Department by one of the following methods:
Telephone: +44 (0)333 577 9820*
*Telephone lines are open Monday – Friday, 9am – 5pm (Closed Bank Holidays)
Email: customersupport@beldray.co.uk
Fax: 0161 628 2126
Please have your delivery note to hand as details from it will be required.
If you wish to return this product please return it to the retailer from where it was purchased
with your receipt (subject to their terms and conditions).
Guarantee
This product is guaranteed for a period of 1 year from the date of purchase against mechanical
and electrical defects.
This guarantee is only valid if the appliance is used solely for domestic purposes in accordance
with the instructions and provided that it is not connected to an unsuitable electricity supply or
dismantled or interfered with in any way or damaged through misuse. Under this guarantee we
undertake to repair or replace free of charge any parts found to be defective. Reasonable proof
of purchase must be provided.
Nothing in this guarantee or in the instructions relating to this product excludes, restricts or
otherwise affects your statutory rights.
In line with our policy of continuous development we reserve the right to change this product,
packaging and documentation specification without notice.
Consumables are not guaranteed i.e. plug and fuse.
The crossed out wheelie bin symbol on this item indicates that this appliance
needs to be disposed of in an environmentally friendly way when it becomes
of no further use or has worn out. Contact your local authority for details of
where to take the item for recycling.
THE SCIENCE
BEHIND HEAT Guarantee 11
Text
BEL0209 10 in 1 Multi-function Steam Cleaner
12 Please retain all instructions for future reference.
Made in China.
CD090414/MD000000/V1
Imported and Distributed by:
UP Global Sourcing,
Victoria Street,
Manchester OL9 0DD. UK.
… 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Beldray BEL0207 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info