Bedienungsanleitung Belgacom belgafax 180 ts (Seite 12 von 52) (Englisch)

424293

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

3 Telephone func-

tions

For information on how to connect additional cordless tel-

ephones and another device and which functions are avail-

able to you, please refer the chapter on Telephone Connec-

tions and additional devices, Page 39.

Making Telephone Calls on the

Machine

Dial the desired telephone number. There are multiple

ways to do this. Then lift up the handset.

Direct Dialling

Manual dialling: Dial the desired telephone number

with the number pad.

Recalling Short Dial Number

Telephone book:

1 Press m

2 Select an entry using [. Enter the starting letters with

the numeric keypad to quickly navigate through the tel-

ephone book.

Redial list: Press @. Use [ to select an entry from the

list of the dialled numbers.

Outgoing Calls

Caller list: Press and hold @ (at least two seconds). Use

the [ to select an entry from the list of callers.

Calls Received

CLIP Prerequisite

Getting outside line

PABX Systems

Private branch exchanges (PABX) are typical in many of-

fices and some households. You must dial an outside line

access code in order to get a connection to the public tele-

phone network (PSTN) from a PABX.

Enter the outside line access code with which you reach the

public telephone network before you enter the desired

number or select a stored entry. The outside line access

code is usually 0.

Outside Line Access Code Error

Setting up an extension

Inserting a Dialling Pause

It can be necessary to insert a dialling pause into the tele-

phone number, for instance for the outside line access

code. Press R. The second part of the number is only di-

alled once the connection with the main number has been

established.

Putting a call from cordless tele-

phone

Dialling a numb er

Dial the desired number. There are several ways to do this:

Then press “.

Direct dialling

Forwarding fax to the device

Manual dialling: Dial the desired number using the nu-

meric keypad.

Telephone Book of the Cordless Telephone:

1 Hold m pressed (for at least two seconds).

2 Select an entry using [. Enter the starting letters with

the numeric keypad to quickly navigate through the tel-

ephone book.

Telephone Book of the Device:

1 Press m.

2 Select an entry using [. Enter the starting letters with

the numeric keypad to quickly navigate through the tel-

ephone book.

Short dialling:

1 Press and hold the relevant numeric key on the device

(at least two seconds).

2 Press “ on the cordless telephone.

Redial list: Press and hold @ (at least two seconds). Use

[ to select an entry from the list of the dialled numbers.

You can also lift up the receiver first, then dial a

number. The dialling process begins immediately.

You can also load short dial entries by holding the re-

spective number button pressed (for at least two sec-

onds).

You can also load telephone book entries by

pressing OK, 11 and OK.

You can save an entry multiple times with the

same name but in a different category. In the tel-

ephone book, the first letter of the category ap-

pears after the entry.

You can also load the redial list by pressing OK,

22 and OK.

You can also load the caller list by pressing OK,

21 and OK.

The Caller Line Identification (CLIP) service can be

activated on your telephone line. Please contact Bel-

gacom for information about this service.

In rare cases, the outside line access code may be a

different number or a two-digit number. For older

telephone systems, the outside line access code can be

R (= Flash). Press R to enter this outside line access

code. If the connexion to the public telephone net-

work is not possible, contact your telephone system

supplier.

If you operate your device permanently at an exten-

sion, store the outside line access code with the 96

function (see page 39).

You can also press “ first and then dial a number.

The dialling process begins immediately.

If you receive a call on the cordless telephone and

hear that it is a fax call (whistling tone or silence), you

can start the fax reception on the device. Press either

o on the device or *5 on the cordless telephone.

If you have added an additional number to an en-

try, this entry appears twice in the telephone

book. The symbol of the category appears before

the name.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Belgacom belgafax 180 ts Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Belgacom belgafax 180 ts

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info