535924
47
Zoom out
Zoom in
Vorherige Seite
1/133
Nächste Seite
45
Using the Web-Based Advanced User Interface
45
section
2
1
3
4
5
6
7
8
9
10
11
Using the Wireless Mode Switch
Your Router can operate in three different wireless modes: 802.11g-
Auto, 802.11g-Only, and 802.11g-LRS. The different modes are
explained below.
802.11g-Auto Mode
In this mode, the Router is compatible with 802.11b and 802.11g
wireless clients simultaneously. This is the factory default mode and
ensures successful operation with all Wi-Fi-compatible devices. If
you have a mix of 802.11b and 802.11g clients in your network, we
recommend setting the Router to 802.11g-Auto mode. This setting
should only be changed if you have a specific reason to do so.
802.11g-Only Mode
802.11g-Only mode works with 802.11g clients only. This mode
is recommended only if you want to prevent 802.11b clients from
accessing your network. To switch modes, select the desired
mode from the Wireless Mode drop-down box. Then, click
Apply Changes.
802.11g-LRS Mode
We recommend you DO NOT use this mode unless you have a very
specific reason to do so. This mode exists only to solve unique
problems that may occur with some 802.11b client adapters and is
NOT necessary for interoperability of 802.11g and 802.11b standards.
When to Use 802.11g-LRS Mode
In some cases, older 802.11b clients may not be compatible with
802.11g wireless. These adapters tend to be of inferior design and
may use older drivers or technology. 802.11g-LRS (Limited Rate
Support) allows these clients to be compatible with the newer
802.11g technology. Switching to this mode can solve problems that
sometimes occur with these clients. If you suspect that you are using
a client adapter that falls into this category of adapters, first check
with the adapter vendor to see if there is a driver update. If there
is no driver update available, switching to 802.11g-LRS mode may
fix your problem. Please note that switching to 802.11g-LRS mode may
decrease 802.11g performance slightly.
47

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Belkin F5D7230-4 Draadloze G router wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Belkin F5D7230-4 Draadloze G router

Belkin F5D7230-4 Draadloze G router Bedienungsanleitung - Deutsch - 120 seiten

Belkin F5D7230-4 Draadloze G router Bedienungsanleitung - Holländisch - 120 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info