Bedienungsanleitung Belkin F5D8235 - N plus Wireless Router (Seite 79 von 89) (Englisch)

602068

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

N+ Wireless Router

SECTIONSTable of Contents 1 2 3 4 5 6 7 8 109

TROUBLESHOOTING

Limiting the wireless transmit rate—Limiting the wireless transmit rate

can help improve the maximum wireless range and connection stability.

Most wireless cards have the ability to limit the transmission rate. To

change this property, go to the Windows Control Panel, open “Network

Connections” and double-click on your wireless card’s connection. In

the properties dialog, select the “Configure” button on the “General” tab

(Windows 98 users will have to select the wireless card in the list box

and then click “Properties”), then choose the “Advanced” tab and select

the rate property.

Wireless client cards are usually set to automatically adjust the wireless

transmit rate for you, but doing so can cause periodic disconnects when

the wireless signal is too weak; as a rule, slower transmission rates are

more stable. Experiment with different connection rates until you find the

best one for your environment. Note that all available transmission rates

should be acceptable for browsing the Internet. For more assistance,

see your wireless card’s user manual.

I am having difficulty setting up Wired Equivalent Privacy (WEP)

security on my Belkin Router.

1. Log into your Router. Open your web browser and type in the IP

address of the Router. (The Router’s default is 192.168.2.1.) Log into

your Router by clicking on the “Login” button in the top right-hand

corner of the screen. You will be asked to enter your password. If

you never set a password, leave the “Password” field blank and

click “Submit”. Click the “Wireless” tab on the left of your screen.

Select the “Encryption” or “Security” tab to get to the security

settings page.

2. Select “128-bit WEP” from the drop-down menu.

3. After selecting your WEP encryption mode, you can type in your

hex WEP key manually, or you can type in a passphrase in the

“Passphrase” field and click “Generate” to create a WEP key from

the passphrase. Click “Apply Changes” to finish. You must now set

all of your clients to match these settings. A hex (hexadecimal) key

is a mixture of numbers and letters from A-F and 0-9. For 128-bit

WEP, you need to enter 26 hex keys. For example: C3 03 0F AF 4B

B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key

4. Click “Apply Changes” to finish. Encryption in the Router is now

set. Each of your computers on your wireless network will now

need to be configured with the same security settings.

WARNING: If you are configuring the Router from a computer with a

wireless client, you will need to ensure that security is turned on for this

wireless client. If this is not done, you will lose your wireless connection.

Note to Mac Users: Original Apple AirPort products support 64-bit

encryption only. Apple AirPort 2 products can support 64-bit or 128-

bit encryption. Please check your Apple AirPort product to see which

version you are using. If you cannot configure your network with 128-bit

encryption, try 64-bit encryption.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Belkin F5D8235 - N plus Wireless Router Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info