Bedienungsanleitung Belkin F5D8236 (Seite 73 von 89) (Englisch)

602070

Zoom out

Zoom in

Vorherige Seite

1/89

Nächste Seite

N Wireless Router

SECTIONSTable of Contents 1 2 3 4 5 6 7 8 109

TROUBLESHOOTING

Setup Assistant CD does not automatically start.

If the CD-ROM does not start the Setup Assistant automatically, it could

be that the computer is running other applications that are interfering

with the CD drive.

1. If the Setup Assistant Welcome screen does not appear within

15-20 seconds, open up your CD-ROM drive by double-clicking

on the “My Computer” icon that is located on your desktop.

2. Next, double-click on the CD-ROM drive that the Setup

Assistant CD has been placed in to start the installation.

3. The Setup Assistant should start within a few seconds. If, instead,

a window appears showing the files on the CD, double-click on the

icon labeled “SetupAssistant”.

4. If the Setup Assistant still does not start, reference the section

titled “Manually Configuring Network Settings” (page 64) of this

User Manual for an alternative setup method).

Setup Assistant cannot find my Router.

If the Setup Assistant is not able to find the Router during the installation

process, please check the following items:

1. If the Setup Assistant is not able to find the Router during the

installation process, there may be third-party firewall software

installed on the computer attempting to access the Internet.

Examples of third-party firewall software are ZoneAlarm,

BlackICE PC Protection, McAfee Personal Firewall, and Norton

Personal Firewall. If you do have firewall software installed on

your computer, please make sure that you properly configure it.

You can determine if the firewall software is preventing Internet

access by temporarily turning it off. If, while the firewall is disabled,

Internet access works properly, you will need to change the firewall

settings to function properly when it is turned on. Please refer to

the instructions provided by the publisher of your firewall software

for instructions on configuring the firewall to allow Internet access.

2. Unplug power to the Router for 10 seconds, and then plug the

power back into the Router. Ensure that the Router’s “router” LED is

on; it should be solid BLUE. If not, check to make sure that the AC

adapter is connected to the Router and plugged into a wall outlet.

3. Ensure that you have a cable connected between the network

(Ethernet) port on the back of the computer and one of the

“to Wired Computers” ports on the back of the Router.

Note: The computer should NOT be connected to the port labeled “to

Modem” on the back of the Router.

4. Try shutting down and restarting your computer, then rerunning the

Setup Assistant.

If the Setup Assistant is still unable to find the Router, reference

the section titled “Manually Configuring Network Settings” for

installation steps.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Belkin F5D8236 Seite 73

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Belkin F5D8236

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info