Bedienungsanleitung Bellman BE1470 (Seite 10 von 13) (Deutsch)

661649

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

109 Installer’s guide Installer’s guide 110

Care and cleaning

Please note: Failure to follow these care and cleaning instructions could result in damage to the

pager and void the warranty.

Using connectors and jacks

Never force a connector into a jack. Check for obstructions on the jack. If the connector and jack don’t join

with reasonable ease, they probably don’t match. Make sure that the connector matches the jack and that you

have positioned the connector correctly in relation to the jack.

Using the pager

Operate the pager in a dry environment where the temperature is always between 0° and 35° C (32° and 95° F).

If the pager gets wet, it should no longer be regarded as reliable and should therefore be replaced.

Cleaning

To clean the pager, use a soft, lint-free cloth. Avoid getting moisture in openings. Don’t use window or household

cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives.

Service and warranty

If the pager appears to be damaged or doesn’t function properly, follow the instructions in this user guide

If the pager still doesn’t function as intended, contact your local dealer for information on service and

warranty.

Additional information

For information about the proper disposal of the pager, and for other important safety and regulatory

compliance information, see the section Important safety instructions on the following page.

Technical information

Dimensions and weight H 86mm (3.4") x W 57mm (2.2")x D 29mm (1.1"). Weight: 70 g (2.5 oz.) incl. battery

Power supply Mains power: 7.5 V DC 200 mA via the BE1260 charger accessory

Battery power: 1 x 1.5 V AAA alkaline or 1 x 1.2 V AAA NiMH rechargeable battery

Power consumption Active: 220 mA, Idle position: 1 mA

Operating time Alkaline battery ~ 2–3 weeks, NiMH battery ~ 1week, fully charged

Activation Via Visit transmitter

Radio frequency 315 MHz, 433.92 MHz or 868.3 MHz depending on region

Coverage 50 – 250m (55 – 273yd) depending on radio frequency. Coverage is reduced by

walls, large objects and other radio transmitters.

Accessories BE1260 Pager charger, BE1270 Bed shaker

In the box BE1470 Pager, Belt clip, safety cord and an extra front label

Environment For indoor use only.

Regulatory Fulls CE, FCC, RoHS, A-Tick, WEEE, Der Grüne punkt

Additional information

Operating temperature 0° – 35° C, 32° – 95° F

Transport and storage temp. -10° – 50° C

Relative humidity 15% – 90% (non condensing)

Maintenance and cleaning Maintenance free. Clean with a dry cloth. Don’t use household cleaners, aerosol

sprays, solvents, alcohol, ammonia, or abrasives.

Warranty and service If the product appears to be damaged or doesn’t function properly, follow the

advice in this booklet. If it still doesn’t function properly, contact your retailer for

info about obtaining warranty service

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellman BE1470 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bellman BE1470

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info