Bedienungsanleitung Bellman Symfon BE2030 - Mino (Seite 4 von 11) (Englisch)

747147

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

Charging

Mino is supplied with a built-in rechargeable battery. The battery must be charged

before using the product for the rst time. Mino contains a Lithium-Ion battery

and a universal charger.

Warning: The product may only be charged with the charger supplied or using

accessories from Bellman & Symfon.

Connect the charger as illustrated in the fold-out section of the manual.

Fit the plug and check that it is locked properly before it is connected to the

wall socket. When the charging connector is connected to the Charger and

Mino, the Battery Status LED (3) changes from green to orange to indicate that

charging is taking place. When charging is nished, after about 4 hours, the

LED turns green again.

Function

Connect BE9122 Bellman Stereo Headphones, BE9159 Bellman Neck Loop, BE9403

Bellman Stetoclip, BE9124 Bellman In-ear Phones or another listening product

recommended by Bellman & Symfon to the headphone output (13) on the

right-hand side as illustrated in the fold-out section of the manual.

Switching on

Press the On/O button

(6). The Battery Status LED (3) starts to shine with a

green light to indicate that the unit is on.

Mino always starts with the internal microphone selected as the sound source.

In addition, the volume control is always set to low volume to avoid unpleasant

sound levels.

Selecting the sound volume

Use the volume control’s

+ button (9) to increase and the - button (10) to

reduce the sound level. The Volume and Tone LED Indicator (8) shows the sound

level. The more LEDs that are lit, the higher the volume. The LED indicator goes

out 5 seconds after the sound volume has been set.

Selecting the tone

Use the tone control’s

< button (11) to reduce and the > button (12) to increase

the treble in the tone. The Volume and Tone LED Indicator (8) shows the selected

setting. The LED indicator goes out 5 seconds after the sound quality has been set.

Switching off

When you have nished, you can switch o Mino by pressing the On/O buttons

(6) and holding it down until the Battery Status LED (3) goes out.

Choice of microphones

Mino contains two microphone options: one omnidirectional and one directional

microphone.

You can switch between omnidirectional and directional microphone reception

by pressing the

M button (5). The omnidirectional microphone is indicated by

the Microphone LED (2) lighting up green and the directional microphone by it

lighting up orange.

With the directional microphone you can ”point” towards the sounds source that

you are interested in listening to while reducing sound from other directions. This

is particularly useful in difficult listening situations, e.g. in crowds or in very noisy

environments.

Telecoil/T position

The built-in telecoil is angled at 45 degrees in order to catch inductive signals from

an inductive loop both when Mino is in the horizontal position (in the hand or on a

table) and in the vertical position (on a clip or neck strap).

The T position can be used in premises where an inductive loop (or hearing loop)

has been fitted. Look for the inductive loop symbol or ask staff whether there is an

inductive loop if you are unsure. The T position is indicated by the indicator for the

external sound source lighting up green.

Selecting the signal source

It is easy to select the sound source.

The user can manually choose between the internal microphone (MIC position) or

built-in telecoil (T position) by pressing the buttons

M(5) and T (7) on the front.

When switching between signal sources, the volume control will be set automati-

cally to a low level to avoid unpleasant sound levels.

Mino automatically selects the input for the external sound source (16) when

something is connected. When you remove the connector, Mino will automatically

return to the internal microphone (

M position).

External sound source

If the audio cable (which has a small 2.5 mm jack plug on one end) is connected to

the external sound source input (16), the internal microphone will be disconnected

and the external sound source will be automatically selected. The External Sound

LED (4) will light up green and orange at the same time to indicate that the sound is

coming from an external sound source.

If the audio cable is disconnected, the sound will be reconnected to the internal

microphone again.

With the audio cable connected to a TV, hi- equipment, MP3 player or similar

sound source, you can listen to absolutely rst class stereo sound.

The input sensitivity is automatically adjusted to suit dierent sound sources.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bellman Symfon BE2030 - Mino Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bellman Symfon BE2030 - Mino

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info