Bedienungsanleitung Ben-e-bike TWENTY E-POWER 2020 (Seite 19 von 67) (Englisch)

733206

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

19 BEN-E-BIKE INSTRUCTION MANUAL

AMPERUM GmbH

Stuttgarter Str. 72

D-78628 Rottweil

www.ben

bike.

net

info@ben-e-bike.com

• Have your child practice emergency braking.

• Practice with your child how to handle the gear shift until he / she can operate the gear shift so that its

attention is not affected (see chapter "Operation >> Gear Shift").

• Do not allow your child to drive alone unless you can answer for it..

AFTER A FALL

After a fall or accident it hidden damage to the BEN-E-BIKE may arise, e.g. hairline cracks. Components made of

carbon, which have suffered a shock impact, as well as bent parts made of aluminium can break suddenly. It is not

allowed to straighten bent parts because those are then prone to break or fail. This is especially true for the fork,

the handlebar, the brake levers, the crank, the seat post and the pedals. When in doubt, replacing these parts is

always a better choice because your child's safety is of paramount importance.

• Have the BEN-E-BIKE inspected by your specialist dealer for possible damage after a serious fall or

accident.

• Do not straighten bent components.

• Damaged or bent components should be immediately replaced for original replacement parts by your

specialized dealer.

• Don't use the BEN-E-BIKE if any defect can be detected

• After minor falls, check all components of the pedelec, e.g. when the BEN-E-BIKE has toppled

• Make sure the chain is still in proper position on the front chainring and the sprockets of the rear cassette.

If the wheel has toppled to the right side, you should check the functionality of the derailleur. A bent rear

derailleur or a bent hanger can cause the rear derailleur (or the chain) to get into the spokes. There is then

acute danger of falling!

• In case of any doubt, contact your specialized dealer!

SPECIAL FEATURES OF CARBON MATERIALS

The carbon material of the handlebar offers some special features compared to other lightweight materials. It is of

major importance to be aware of these characteristics so that you can always rely on it. Carbon - if treated

properly - allows for extremely strong and highly resilient components with very low weight. A very special

feature, however, is its brittleness. Components made from carbon typically do not deform under heavy load,

although the internal structure may already be damaged. The fibres can in extreme cases separate from one

another, means the so-called delamination occurs, whereby the strength of the component decreases significantly.

Any overstressing that has already damaged the internal fibres is not indicated by any residual bending as this

happens with steel or aluminium components. For this reason, a carbon part can fail after an overload in

subsequent use, which can lead to the fall with unpredictable consequences. Have the affected component

inspected by your specialized dealer after a heavy fall!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ben-e-bike TWENTY E-POWER 2020 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ben-e-bike TWENTY E-POWER 2020

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info