Bedienungsanleitung Benning CFlex 1 (Seite 11 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch)

577345

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

07/ 2014

BENNING CFlex 1



2. Safety note

The instrument is built and tested in accordance with

DIN VDE 0411 part 1/ EN 61010-1

DIN VDE 0411 part 2-032/ EN 61010-2-032

DIN VDE 0411 part 031/ EN 61010-031

and has left the factory in perfectly safe technical condition.

To maintain this condition and to ensure safe operation of the unit, the user must observe the

notes and warnings given in these instructions at all times. Improper handling and non-obser-

vance of the warnings might involve severe injuries or danger to life.



WARNING! Be extremely careful when working with bare conductors or main

line carrier! Contact with live conductors will cause an electric shock!



The BENNING CFlex 1 may be used only in electrical circuits of over voltage

category III with a maximum voltage of 600 V or of over voltage category II with

a maximum voltage of 1000 V between the conductor and ground.

Remember that work on electrical components of all kinds is dangerous. Even

low-voltages of 30 V AC and 60 V DC may be dangerous to human life.



Before starting the unit, always check it as well as all measuring lead and

wires for signs of damage.

Should it appear that safe operation of the unit is no longer possible, it should be shut down

immediately and secured to prevent that it is switched on accidentally.

It may be assumed that safe operation is no longer possible:

- if the device or the measuring lead exhibit visible damages,

- if the unit no longer works,

- after long periods of storage under unfavourable conditions,

- after being subject to rough transportation, or

- if the device or the measuring lead are exposed to moisture.

3. Scope of delivery

The scope of delivery for the BENNING CFlex 1 comprises:

3.1 One BENNING CFlex 1 with one firmly connected safety measuring lead with 90° offset

4 mm safety plugs,

3.2 One compact protective pouch,

3.3 Two 1.5 V batteries of type AAA (IEC LR 03)

3.4 One operating manual

4. Description of AC current transformer

The flexible AC current transformer BENNING CFlex 1 is a measuring adapter for analog and

digital multimeters and is intended for AC current measurements up to 3000 A.

See figure 1: Appliance front face

The display and operator control elements specified in Fig. 1 are designated as follows:



Flexible measuring loop, for clamping the single-wire AC current-carrying (live) conductor



Closing mechanism of the measuring loop



Rotary switch, for selecting the measuring ranges



Output with 4 mm safety plugs, red, black, 90° offset



Green LED (“ON” LED), lights when the device is switched on

Red LED (battery indication), lights in case of discharged battery

Battery compartment cover

5. General information

5.1 General details on the AC current transformer

5.1.1 The rotary switch



is intended for selecting the measuring ranges of 30 A, 300 A and

3000 A AC.

5.1.2 The BENNING CFlex 1 is supplied by means of two 1.5 V batteries of type AAA (IEC

LR03).

5.1.3 If the battery voltage falls below the specified operating voltage of the BENNING CFlex 1,

the red LED (battery indication)

lights.

5.1.4 The battery life is approx. 120 hours (alkaline battery).

5.1.5 Temperature coefficient of the measured value:

0.1 x (stated measuring accuracy)/ °C < 18 °C or > 28 °C, related to the value for the

reference temperature of 23 °C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning CFlex 1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info