Bedienungsanleitung Benning CM6 (Seite 16 von 98) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch, Türkisch, Schwedisch)

577182

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

09/ 2013

BENNING CM 6



 COM jack, common socket for voltage, resistance measurement and con-

tinuity testing,

 Opening lever, for opening and closing the current probe,

 Bulge of current probe, protects against contact with conductor,

 Measuring pliers, for clamping on the single wire current-carrying conductor,

) This is what the automatic polarity indication for DC voltage refers to

5. General information

5.1 General details on the current probe multimeter

5.1.1 The digital display  is a 3¾-digit liquid crystal display with 14 mm high

numerals, complete with decimal point. The largest numerical value

which can be displayed is 4000.

5.1.2 The polarity indication  is automatic. Only one polarity with respect to

the socket marked „-“ is indicated.

5.1.3 The overranging is indicated by „0L” or „- 0L” and, in part, an acoustic

warning.

Warning, no indication and prior warning in the event of an overload

condition!

5.1.4 Button (yellow)  switches on the display illumination. Shutdown is

effected by a renewed press of the button or automatically after 60

seconds.

5.1.5

Measured value storage „HOLD”: Press the button „HOLD”  to store the

measured result. At the same time, the display shows the symbol „HOLD”.

A renewed press of the button switches back into measuring mode.

5.1.6 The MIN/MAX button function  inputs and stores automatically the

highest and lowest measured value . The following values are indicated

by button operation:

„MAX” indicates the stored maximum value, and „MIN” indicates the

lowest value. The continuous detection of the MAX-/ MIN value can

be stopped or started by pressing the button „HOLD” . Pressing the

button „MIN/MAX“ for an extended period of time (2 seconds) switches

back into normal mode.

5.1.7 The button PEAK  (peak value storage) detects and stores the posi-

tive and negative peak/ crest values in the function V AC and A AC. At

the start of the measurement, press the button PEAK  for approx. 3

seconds in order to increase measurement precision and to fine-adjust

the BENNING CM 6. Pressing the button indicates the „PMAX” or

„PMIN” values in the display. Pressing the PEAK button for an extended

period of time (2 seconds)  switches back into normal mode.

5.1.8 The measuring rate of the BENNING CM 6 amounts nominally to

1.5 measurements per second for the digital display.

5.1.9 The BENNING CM 6 is switched on and off with the rotary switch .

Shutdown position „OFF”.

5.1.10 The BENNING CM 6 switches off automatically after approx. 30 min-

utes (APO, Auto-Power-Off). It switches back on again if a button or

the rotary switch is operated. A buzzer sound signals the automatic

switchoff of the unit. The automatic switchoff can be deactivated by

pressing a button (except the button „HOLD”) and simultaneously

switching on the BENNING CM 6 from switch position „OFF”.

5.1.11 Temperature coefficient of the measured value: 0.2 x (stated measuring

precision)/ °C < 18 °C or > 28 °C, related to the value for the reference

temperature of 23° C.

5.1.12

The BENNING CM 6 is supplied by two 1.5 V mignon batteries (IEC LR 06).

5.1.13 If the battery voltage drops below the specified operating voltage of the

BENNING CM 6, then a battery symbol appears in the display.

5.1.14 The life span of a battery amounts to approx. 600 hours (alkali battery).

5.1.15 Appliance dimensions:

(L x W x H) = 275 x 105 x 47 mm

Appliance weight:

534 g

5.1.16 The safety measuring cables supplied are expressly suited for the rated

voltage and the rated current of the BENNING CM 6.

5.1.17 Largest opening of pliers: 53 mm

5.1.18 Largest cable diameter: 51 mm

6. Environment conditions:

- The BENNING CM 6 is intended for making measurements in dry environ-

ment.

- Maximum barometric elevation for making measurements: 2000 m,

- Overvoltage category/ Siting category: IEC 60664-1/ IEC 61010-1 → 600 V

category IV; 1000 V category III,

- Contamination class: 2,

- Protection Class: IP 30 (DIN VDE 0470-1 IEC/ EN 60529)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning CM6 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info