577341
21
Zoom out
Zoom in
Vorherige Seite
1/169
Nächste Seite
12
Operating manual
BENNING MM 1‑1/ 1‑2/ 1‑3
Digital multimeter for
- DC voltage measurements
- AC voltage measurements
- DC current measurements (BENNING MM 1-2/ 1-3)
- AC current measurements (BENNING MM 1-2/ 1-3)
- resistance measurements
- diode tests
- continuity tests
- capacity measurements (BENNING MM 1-2/ 1-3)
- frequency measurements (BENNING MM 1-2/ 1-3)
- temperature measurements (BENNING MM 1-3)
Tableofcontents
1. User instructions
2. Safetyinstructions
3. Scopeofdelivery
4. Device description
5. Generalinformation
6. Ambient conditions
7. Electricalspecications
8. Measuring with the BENNING MM 1‑1/ 1‑2/ 1‑3
9. Maintenance
10. Usingthefoldingsupportandthesuspensionxture
11. Technicaldataofmeasuringaccessories
12. Environmental note
1. Userinformation
This operating manual is intended for
- skilled electricians and
- electrotechnically trained personnel.
The BENNING MM 1-1/ 1-2/ 1-3 is intended for measurements under dry am-
bient conditions. It must not be used in electrical circuits with a nominal voltage
higher than 1000 V DC and 750 V AC (see section 6 „Ambient conditions“ for
details).
The following symbols are used in this operating manual and on the
BENNING MM 1-1/ 1-2/ 1-3:
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, must comply with documentation!
This symbol indicates that the information provided in the operating
manual must be complied with in order to avoid risks.
This symbol on the BENNING MM 1-1/ 1-2/ 1-3 indicates that the
BENNING MM 1-1/ 1-2/ 1-3 is equipped with protective insulation
(protection class II).
This symbol on the BENNING MM 1-2/ 1-3 indicates built-in fuses.
This symbol appears on the display to indicate a discharged battery.
This symbol designates the „diode test” range.
This symbol designates the “continuity test“ eld.
The buzzer is intended for acoustic result output.
This symbol indicates the „capacity test“ eld.
(DC) Direct voltage or current
(AC) Alternating voltage or current
Ground (voltage against ground).
09/ 2013
BENNING MM 1-1/ 1-2/ 1-3
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Benning MM 1.2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info