Bedienungsanleitung Benning ST 750A (Seite 57 von 58) (Englisch)

577368

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

08/ 2012 57 / 58



BENNING ST 750 A

22. Warranty Terms

The BENNING ST 750 A is subject to stringent quality testing. In case of faults with regard to correct

functioning, we grant a warranty of 24 months. Manufacturing faults or material defects shall be

eliminatedbyusfreeofchargeasfarasthedeviceshowsmalfunctionwithoutexternalinuence

and is returned to us without having been opened. Damages caused by falls or incorrect use are

excluded from warranty.

23. Maintenance / Calibration

Maintenance

The device does not require any special maintenance. Please make sure that the surface is clean.

For cleaning, use a slightly moistened cloth. Do not use any cleaning agents, abrasives or solvents.

Exceptforspeciccalibrationintervals,thedevicedoesnotrequireanyspecialmaintenance.How-

ever, in case of malfunctions occurring, switch the device OFF (if necessary). First, check all

cable connections and check whether the device is supplied properly. Switch the device ON again.

Mostly, software problems can be eliminated by reinitialization of the device.

Calibration

According to DIN VDE 0701-0702, the following shall apply as of 1st June 2008:

"Themeasuringinstrumentsusedforperiodictestingshallbetestedandcalibratedregularly."

Feel free to make an appointment with us for testing and calibrating your testers.

Phone: +49 (0) 2871 / 93-555

Forouraddress,pleaserefertochapter24,"ProductSupport".

Return and Environmentally Sound Disposal

The device is considered to be a product of category 9 (monitoring and control instruments) as de-

nedintheGerman"ElektroG"(ElectricalandElectronicEquipmentAct).Thisdeviceisnotsubject

totheRoHSDirective.IncompliancewithWEEE2002/96/EGandtheGerman"ElektroG"(Electri-

cal and Electronic Equipment Act), we mark our electrical and electronic devices (as of 8/2005) with

the symbol shown on the right according to DIN EN 50419.

These devices must not be disposed of via the domestic waste. Regarding the return of waste elec-

trical and electronic equipment, please contact our Service team (for the address, see chapter 24).

23.1 Repair and Spare Parts Service

Incaseofneed,pleasecontactourProductSupportteam(seechapter24,"ProductSupport").

24. Product Support

Please contact the expert personnel of the supplier or manufacturer for further information.

BENNINGElektrotechnik&ElektronikGmbH&CoKG

Münsterstr. 135/137

D - 46397 Bocholt

Phone: +49 (0) 2871 / 93-0

Fax: +49 (0) 2871 / 93-429

Website: www.benning.de

BENNING Helpdesk phone no.: +49 (0) 2871 / 93-555

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benning ST 750A Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Benning ST 750A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info