Bedienungsanleitung Benno Pedelec - E-bike (Seite 46 von 72) (Englisch)

810831

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

Almost all modern brakes provide

considerably more braking power

than was available for bicycles/

pedelecs in the past. Carefully familiarise

yourself with the brakes, practise using

them and emergency braking, starting on

safe ground with no trafc before setting off

onto roads with trafc.

If you are riding on a long or very

steep slope, do not brake continu-

ously or only use one

brake. This could lead to the

brakes overheating and loss of

braking force.

You are braking properly and safely if you

use both brakes equally. The only exception

is if you are cycling in slippery conditions

such as on sand or a smooth surface. You

should then exercise great care, slowing

yourself down using the rear brake. Oth-

erwise there is the risk of the front wheel

slipping out to the side and causing a fall.

On very long downhill stretches, you should

avoid lightly braking constantly. It is pref-

erable to brake sharply for a shorter time

when taking bends or if you are riding too

fast. This allows the brakes to cool down in

the meantime. This preserves your braking

power.

Your pedelec is supplied with the

corresponding operating instruc-

tions for your specic braking mod-

el. You can get more information about the

brakes on your pedelec in the operating

manual provided by your manufacturer or on

the manufacturer‘s website.

Brakes and brake systems are parts

that can be vital to your safety. You

should therefore service them on a

regular basis. This requires specialist knowl-

edge and special tools. Allow your specialist

retailer to do this type of work on your

pedelec! Work that is improperly carried out

is a risk to your safety on the pedelec!

No oil-based liquids should ever be

applied to brake pads, rim brake

surfaces, brake shoes or brake

discs. These substances reduce the effec-

tiveness of the brakes.

Break pad wear

Normal operation wears down

brake rubbers and brake pads. It is

therefore important to regularly

check the condition of your braking system

and brake pads. Replace worn brake pads

in good time!

Ensure that rims and brake discs are clean

and free of any oil.

After any work on the braking sys-

tem, perform at least one brake test

on safe, empty terrain before you

return to trafc.

Have the brake uid replaced on a

regular basis. Check the brake

shoes regularly and have them re-

placed when they are worn out.

Further information can be found in the op-

erating manual provided by the brake man-

ufacturer.

V-brake rim brakes

What to do if the rubber brakes start rubbing

against the rim: The spring setting allows you to

set the return force in such a way that both brake

pads lift evenly from the rim when you release

the brake lever. Then, check that the brakes are

functioning correctly.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Benno Pedelec - E-bike Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Benno Pedelec - E-bike

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info