100221
67
Zoom out
Zoom in
Vorherige Seite
1/68
Nächste Seite
BenQ DC 4500 User’s Manual
61
7. T
ROUBLESHOOTING
1. The LCD screen panel remains blank after I switch the lens cover
and can't take pictures.
Check that the battery is correctly inserted or plug the DC adapter power to try again.
2. The camera can not take a picture after the capture button is
pressed.
Please check whether the strobe charging LED is blinking. If it’s blinking, it means that the
flash is still under charging. During this time the camera is busy and cannot take pictures.
Wait until the indicator becomes OFF.
3. I have connected the camera to the computer, but the DC 4500
does not appear as a new drive under my operating system.
Make sure that the battery is installed correctly and there is enough power in them.
Check if the camera power is turned on. If not, turn it on and then connect the camera
to the computer again. Please make sure that the driver has been installed if your
operating system is Win 98.
4. In Windows 2000, when I unplug the DC 4500 from my computer
while the USB mass-storage is active, the computer freezes.
You should double click the USB mass storage icon on Windows 2000 system tray to
move DC 4500 from the computer OS first, then unplug the DC 4500.
5. The photos I captured have strange flare on them.
Usually this is caused by the dirty of the lens or maybe there are finger prints on the lens
glass of the Digital Camera 4500. Check the lens glass or the lens of the Digital Camera
4500. If it is not clean or there are some finger prints on it, please clean the lens cover
glass and try not to leave finger prints on it. Leaving finger prints on the lens cover glass
may cause the abnormality of your photos.
6. Error Message Table:
Message Cause
ERR001~ERR003 Unknown File (It means that this file can not
be decoded by the camera.)
ERR004~ERR005, ERR200 System Error (HW component error)
ERR100~ERR138 Card Error (Memory card or file system can
not be operated normally in the camera.)
67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ DC 4500 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ DC 4500

BenQ DC 4500 Bedienungsanleitung - Holländisch - 68 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info