636334
33
Zoom out
Zoom in
Vorherige Seite
1/46
Nächste Seite
BenQ DC 5530 Users Manual
English
Using the DC S30
27
3.4.2 Playing MP3 Files
Follow these instructions to play MP3 files.
1. Power on the camera and select music mode .
The music mode screen appears.
2. Select the MP3 player and press LCD/SET. The first
MP3 track appears and begins playing. The
following explains how to control playback.
Press Q-VIEW/DEL for less than two seconds to
switch between playback modes: All tracks
repeat/one track repeats/normal playback. Press
Q-VIEW/DEL for more than two seconds to
lock and unlock the camera. When locked, only
the power button is functional.
Press LCD/SET to stop and start playback.
Press zoom in and zoom out to raise and
lower the volume.
Press macro to play the previous track. Press
flash to play the next track.
3.4.3 Playing FM Radio Files
1. Power on the camera and select music mode .
The music mode screen appears.
2. You must connect your earphones for the FM radio
to work (the earphone wire acts as an antenna).
Select the FM Radio and press LCD/SET. The FM
radio screen appears. The following explains how to
control playback.
Press Q-VIEW/DEL for less than two seconds to
switch the audio output between the earphone
(default) and the camera speaker. Press
Q-VIEW/DEL for more than two seconds to
lock and unlock the camera. When locked, only
the power button is functional.
Press LCD/SET for less than two seconds to
switch between common stations. Press
LCD/SET for more than two seconds to save the
current station to a common channel.
Press zoom in and zoom out to raise and lower the volume.
Press macro or flash for more than two seconds to scan for the previous or
next available channel. Press macro or flash for less than two seconds to adjust
the tuning to the previous/next frequency in 0.1 MHz steps.
FM Radio
MP3 Player
00:37/03:32
01 / 01 01 / 01
TRACK
Your camera supports the following
audio types:
MPEG-1 Audio Layer-3
Bitrates from 32 to 320 kbps
Sampling frequencies: 32, 44.1,
48 kHz
FM Radio
MP3 Player
STEREO
33445566778899
10
22
87
.
50
MH
Z
Example: Press LCD/SET to select a channel (e.g, 6).
Scan to a frequency (e.g, 101.1). Press LCD/SET for
more than two seconds. 101.1 is saved to channel 6.
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ DC S30 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ DC S30

BenQ DC S30 Bedienungsanleitung - Holländisch - 46 seiten

BenQ DC S30 Bedienungsanleitung - Französisch - 46 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info