140583
10
Zoom out
Zoom in
Vorherige Seite
1/50
Nächste Seite
Section 1: Quick Start Guide6
English
Test the remote control
7. Initialise the display
When first turned on (and until tuned), the "First Turn On" menu will display:
The display uses the selections you make in this menu to determine which menu language to
display and which TV station programs to search for and tune appropriate to the region you
selected. This process need only ever be done once.
1. You can use the left,right, up and down buttons on the remote control or the
display to navigate through the menu, and use the OK button on the remote control or the
Input button on the display to make each selection.
2. When you select a ‘Language, the ‘Country’ and TV ‘Standard’ items will change
automatically to suit. You can select from English, Français, Nederlands, Deutsch, Italiano
and Español.
Once youve selected a ‘Language, if your country is not displayed in the ‘Country’ item, you
can select one from UK, France, Netherlands, Germany, Italy, Spain, Austria, Belgium,
Luxemburg, Switzerland, Portugal, or Others.
If ‘Others’ is selected as the ‘Country’, you will also need to select the TV broadcast standard
suitable for your region from BG, DK, I or L.
3. After youve chosen your ‘Language’, ‘Country’ and TV ‘Standard’, select the ‘Auto
Installation’ menu item and then press the OK button on the remote control. After a short
pause, the display will start searching for available programs and tune, sort and store them
for you. This may take several minutes, depending on the available TV programs in your
local reception area. Please allow the display to complete this tuning process.
Press the Power button on the remote control. The display should turn
on, and the power indicator change to green. If so, progress to the next
step (7. Initialise the display) below.
If the display does not turn on, first check that the power is available
(the power indicator will be lit red).
If so, try pressing the power button on the right of the top edge of the
display. If the display turns on by this method, the problem lies with the
remote control.
Secondly, check that the remote control batteries are properly installed.
If need be, replace the batteries with new ones or known good ones.
See the troubleshooting section at the rear of the User’s Manual for
further assistance.
To turn off the display, press the Power button on the top of the display,
or the Power button on the remote control again, and the display will
return to standby mode (the power indicator will turn red.)
DV3251-En-QuickStartGuide.fm Page 6 Tuesday, December 13, 2005 2:03 PM
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ dv 3251 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info