140583
22
Zoom out
Zoom in
Vorherige Seite
1/50
Nächste Seite
Using the remote control18
English
Using the remote control
Power on, power off and standby
Turning on the display
After plugging the display's power cord into a wall outlet, the display will enter standby mode
automatically. The power indicator will light up red.
Press the (Power) button on the top of the display, or press the Power button on the remote
control as highlighted. The display will turn on and the power indicator will change to green.
Turning off the display
Press the (Power) button on the top of the display, or the Power button on the remote
control again, and the display will return to standby mode. The power indicator will turn red.
Switching inputs
Turn on all connected equipment or devices before selecting an input.
Press the INPUT button on your display, or press the Input button on your remote control
to display the current selected input.
Press the button repeatedly until your desired input is displayed. The sequence is as follows:
ATV AV1 AV1-RGB AV2 (or AV2-S) AV3 (or AV3-S) AV4 (or AV4-S)
Component 1 Component 2 PC HDMI (or DVI) ATV...
• AV2-S will appear only when S-Video (Y/C) signal is detected from the SCART inputs.
• AV3-S and AV4-S will appear only when the S-Video input signal is connected to these inputs.
• DVI will appear only when DVI digital video signal is connected to the HDMI input.
Adjusting volume
Adjusting the volume
1. Press the Vo lu me button on your display or press the Vo lume + button on your
remote control to increase volume. The volume indicator will increase in length as volume
rises.
2. Press the Vo lu me button on your display, or press the Vol ume - button on your
remote control to decrease volume. The volume indicator will decrease in length as volume
falls.
Mute setting
1. Press the Mute button on the remote control to turn off the audio temporarily.
2. Press the Mute button once more, or press the Vo lu m eor Vo lu me button on your
display to restore the sound level.
TV sound mode selection
Press the TV sound button on your remote control to select "Sound 1", "Sound 2", "Sound
3", "Auto", "Nicam", "Stereo" or "Mono" systems (the items available will depend on the TV
sound system being received).
Changing programs
Using the program selection buttons on the remote control to change programs
To select a single-digit program, press the corresponding program selection button on the
remote control. For example, to select program 8, press the program selection button on
the remote control.
To select a double-digit program, press the Program entry button on the remote control,
and then enter the program number using the program selection buttons. For example, to
select program 28, press the Program entry button, and then the , program
selection buttons on the remote control.
DV3251-En.book Page 18 Monday, December 12, 2005 4:07 PM
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ dv 3251 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info