Bedienungsanleitung BenQ GP3 (Seite 22 von 122) (Englisch)

543740

Zoom out

Zoom in

Vorherige Seite

1/122

Nächste Seite

Connection

Battery LED indicator behavior

• Battery + Adaptor

• We recommend that you keep the battery connected to the projector even when the

projector is connected to a wall outlet.

• The battery needs to be charged for about 3.5 hours if fully discharged.

• While connecting to battery,

LED Mode in Settings will be set to Eco, you can play a

video from any sources for about 2.5 hours at 150AL when the battery is fully charged. (If

you set

LED Mode in Settings to Normal, the battery life will be shortened to about 1

hour at 300AL.)

• ECO mode is suggested for longer time of projection when the unit is operated only with

battery.

• The charging time and capacity of the battery differ depending on the battery status,

operating condition, and duration of use. The battery consumes power even when the

device is not in use. Over time, the maximum operating time gradually shortens.

• The battery can be charged for about 300 times. The battery life differs depending on the

personal habit of use.

Instructions and requirement for handling the battery

• Recommending usage

Please read the battery instructions and the label on its surface before use.

Use the battery indoors under normal condition, temperature: (25±3)°C ,absolute humidity: 65±20%

When in use, the battery shall be kept out of heat, high voltage and avoided children's touching. Do not

drop the battery.

Use the compatible charger. Do not put the battery into the charger over 24 hours.

Do not contact contactor together. Do not demolish or disassembly the battery by yourself. Do not put

the battery in the damp place to avoid danger.

Do not wrap it with conduct material to avoid the damage caused by the direct contact between the

metal and battery. Keep the battery in day places.

Well disposed the disused battery. Do not put it into fire or water.

• Hazard warning

• Forbid disassemble batteries

The battery has protective component and circuit internally to avoid danger. Mishandling such as

improper disassembly will destroy its protective function and make it heat, smoke, distort or burning.

• Forbid short-circuit batteries

Do not touch the plus and minus contactor with metals. Do not put the battery with metal element

together in either storage or movement. If the battery is short-circuit, it carries magnified current, which

will cause damage and make the battery heat, smoke, distort or burning.

• Forbid heat and burn the battery

If heating or burning the battery, it will caused the isolated element in the battery dissolved, protection

function stopped or the electrode burning, over heated, which will make the battery heat, smoke, distort

or burning.

• To avoid use the battery near the heat

Do not use the battery near the fire and stove, or over 60°C, and over heating will cause the battery

internal short-circuit and make it heat, smoke, distort or burning.

Status Condition LED color

In charge Power on / Standby mode Blue blinking

Charging completed Power on / Standby mode Blue solid on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ GP3 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ GP3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info