Bedienungsanleitung BenQ LW61ST (Seite 18 von 60) (Englisch)

469920

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Connection18

• Many notebooks do not turn on their external video ports when connected to a projector. Usually a key

combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/

LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key

simultaneously. Refer to your notebook's documentation to find your notebook's key combination.

• The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER 1 jack.

• If you wish to use this connection method when the projector is in standby mode, make sure the

Monitor Out function is turned on in the SYSTEM SETUP: Advanced menu. See "Standby Settings"

on page 46 for details.

Connecting video source devices

You need only connect the projector to a video source device using just one of the

connecting methods, however each provides a different level of video quality. The method

you choose will most likely depend upon the availability of matching terminals on both the

projector and the video source device as described below:

Connecting audio

The projector has two built-in mono speakers which are designed to provide basic audio

functionality accompanying data presentations for business purposes only. They are not

designed for, nor intended for stereo audio reproduction use as might be expected in

home theater or home cinema applications. Any stereo audio input (if provided), is mixed

into a common mono audio output through the projector speakers.

The built-in speakers will be muted when the AUDIO OUT jack is connected.

• In the unlikely event that you connect the projector to a DVD player via the projector’s HDMI input and

the projected picture displays wrong colors, please change the color space to YUV. See "Changing Color

Space" on page 27 for details.

• The projector is only capable of playing mixed mono audio, even if a stereo audio input is connected. See

"Connecting audio" on page 18 for details.

• If the selected video image is not displayed after the projector is turned on and the correct video source

has been selected, check that the video source device is turned on and operating correctly. Also check

that the signal cables have been connected correctly.

Playing sound through the projector

You can make use of the projector (mixed mono) speaker in your presentations, and also

connect separate amplified speakers to the AUDIO OUT socket of the projector.

If you have a separate sound system, you will most likely want to connect the audio output

of your Video source device to that sound system, instead of to the mono audio projector.

You can also use a microphone to output the sound through the projector speaker.

Te r m i n a l n a m e Terminal appearance Picture quality

HDMI

Best

Component Video

Better

S-Video

Good

Video

Normal

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ LW61ST Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ LW61ST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info