Bedienungsanleitung BenQ LW61ST (Seite 32 von 60) (Englisch)

469920

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Operation32

There are many different shades that are considered to be "white" for various purposes.

One of the common methods of representing white color is known as the “color

temperature”. A white color with a low color temperature appears to be reddish white. A

white color with a high color temperature appears to have more blue in it.

3D Color Management

In most installation situations, color management will not be necessary, such as in

classroom, meeting room, or lounge room situations where lights remain on, or where

building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture

theaters, or home theaters, should color management be considered. Color management

provides fine color control adjustment to allow for more accurate color reproduction,

should you require it.

Proper color management can only be achieved under controlled and reproducible viewing

conditions. You will need to use a colorimeter (color light meter), and provide a set of

suitable source images to measure color reproduction. These tools are not provided with

the projector, however, your projector supplier should be able to provide you with suitable

guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you

select each color, you can independently adjust its range and saturation according to your

preference.

If you have purchased a test disc which contains various color test patterns and can be

used to test the color presentation on monitors, TVs, projectors, etc, you can project any

image from the disc on the screen and enter the 3D Color Management menu to make

adjustments.

To adjust the settings:

1. Go to the PICTURE menu and highlight 3D Color Management.

2. Press MODE/ENTER on the projector or remote control and the 3D Color

Management page is displayed.

3. Highlight Primary Color and press / to select a color from among Red,

Yellow, Green, Cyan, Blue, or Magenta.

4. Press to highlight Hue and press / to select its range. Increase in the range

will include colors consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right

for how the colors relate to each other.

For example, if you select Red and set its

range at 0, only pure red in the projected

picture will be selected. Increasing its range

will include red close to yellow and red close

to magenta.

5. Press to highlight Saturation and adjust

its values to your preference by pressing /

. Every adjustment made will reflect to

the image immediately.

For example, if you select Red and set its

value at 0, only the saturation of pure red will be affected.

RED

BLUE

GREEN

Yellow

Cyan

Magenta

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ LW61ST Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ LW61ST

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info