648927
49
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
Maintenance 49
Replacing the lamp (FOR SERVICE PERSONNEL ONLY)
To reduce the risk of electrical shock, always turn the projector off and
disconnect the power cord before changing the lamp.
To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the
lamp.
To reduce the risk of injuries to fingers and damage to internal components, use caution when removing
lamp glass that has shattered into sharp pieces.
To reduce the risk of injuries to fingers and/or compromising image quality by touching the lens, do not
touch the empty lamp compartment when the lamp is removed.
This lamp contains mercury. Consult your local hazardous waste regulations to dispose of this lamp in a
proper manner.
To assure optimal performance from the projector, it is recommended that you purchase a qualified
projector lamp for lamp replacement.
If lamp replacement is performed while the projector is suspended upside-down from the ceiling, make
sure that no one is underneath the lamp socket to avoid any possible injury or damage to the human eyes
caused by fractured lamp.
Ensure good ventilation when handling broken lamps. We recommend that you use respirators, safety
glasses, goggles or face shield and wear protective clothing such as gloves.
1. Turn the power off and disconnect the projector from the power
outlet. If the lamp is hot, avoid burns by waiting for
approximately 45 minutes until the lamp has cooled.
2. Loosen the screw(s) that secures the lamp
cover on the side of the projector until the
lamp cover loosens.
3. Open the lamp cover.
4. Remove the lamp cover from the projector.
Do not turn the power on with the lamp cover
removed.
Do not insert your fingers between the lamp and the
projector. The sharp edges inside the projector may
cause injuries.
1
2
49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

benq-mh530

Suche zurücksetzen

  • Ich benötige einen Treiber für meinen Projektor (Beamer) BENQ MH 530
    Ich habe Windows 10! Mein Laptop erkennt den Beamer nicht! Eingereicht am 29-7-2017 19:24

    Antworten Frage melden
  • HALLO,MIT WELCHER EINSTELLUNG BEKOMME ICH DAS BILD RUNTER AUF DIE LEINWAND ?SCHRÄGMODUS REICHT NICHT.ICH MUSS DOCH NICHT EIN LEXIKON HINTEN DRUNTER LEGEN.DAS MUSS AUCH ANDERS GEHEN.BEAMER STEHT AUF EINEM GLASREGAL 50 CM VON DER DECKE IN EINER ECKE.DIE LEINWAND IST 3 M ENTFERNT IN DER FLUCHT DER BEAMERBIRNE.SCHRÄG KANN ICH STLLEN ABER NICHT AUF UND AB UND AUCH NICHT SEITWÄRTS.WELCHES MENÜ MUSS ICH NEHMEN? Eingereicht am 17-1-2017 14:47

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ MH530 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ MH530

BenQ MH530 Bedienungsanleitung - Deutsch - 63 seiten

BenQ MH530 Bedienungsanleitung - Holländisch - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info