144937
22
Zoom out
Zoom in
Vorherige Seite
1/51
Nächste Seite
English
Using the remote control 19
Using the remote control
Power on, off and standby
Turning on the TV
After plugging the TV's power cable into a wall outlet, the TV will enter standby mode
automatically. The power indicator will light up orange. Press Power on the remote
control. The TV will turn on and the power indicator will change to blue.
Putting the display to standby
Press Power on the remote control again, and the TV will return to standby mode. The
power indicator will turn orange.

The display still consumes a very small amount of power (about 1W) in standby mode.
Switching inputs
to the display.
• BeawarethatHDMIinputmustbeHDCP-complianttobedisplayed.
When switching to the HDMI inputs, the display needs several seconds to detect the HDCP
information from the signal source and no image will be displayed during this period. This is
not a malfunction.
Adjusting sound setting
Adjusting volume
• PressVOL on the remote control to increase volume. The volume indicator
increases in length as volume rises.
• PressVOL on the remote control to decrease volume. The volume indicator
decreases in length as volume falls.
Mute setting
Press MUTE on the remote control to turn off the sound temporarily.
Press
MUTE once more, or press VOL or VOL to restore the sound level.
Selecting a TV sound mode
Press TV AUDIO on the remote control to toggle TV sound among available modes. (The
modes available will depend on the TV or Video sound system being received).
1. Turn on all connected equipment or
devices before selecting an input.
2. Press
INPUT on the TV to view
the current selected input. Press
INPUT button, use
▲▼
button to
select your desired input then press
OK button to confirm. You can
also press
INPUT continuously
to switch between different input
sources.
• Theseoptionswillonlyappearwhen
corresponding signals are connected
22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ mk2442 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info