Bedienungsanleitung BenQ mp 622 c (Seite 35 von 63) (Englisch)

214798

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Operation 35

1. T1: With the highest color temperature, T1 makes the image appear the most bluish

white than other settings.

2. T2: Makes images appear bluish white.

3. T3: Maintains normal colorings for white.

4. T4: Makes images appear reddish white.

*About color temperatures:

There are many different shades that are considered to be "white" for various purposes. One

of the common methods of representing white color is known as the “color temperature”. A

white color with a low color temperature appears to be reddish white. A white color with a

high color temperature appears to have more blue in it.

4. 3D Color Management

In most installation situations, color management will not be necessary, such as in

classroom, meeting room, or lounge room situations where lights remain on, or where

building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture

theaters, or home theaters, should color management be considered. Color management

provides fine color control adjustment to allow for more accurate color reproduction,

should you require it.

Proper color management can only be achieved under controlled and reproducible viewing

conditions. You will need to use a colorimeter (color light meter), and provide a set of

suitable source images to measure color reproduction. These tools are not provided with the

projector, however, your projector supplier should be able to provide you with suitable

guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you

select each color, you can independently adjust its range and saturation according to your

preference.

If you have purchased a test disc which contains various color test patterns and can be used

to test the color presentation on monitors, TVs, projectors, etc. You can project any image

from the disc on the screen and enter the Color Management menu to make adjustments.

To adjust the settings:

1. Go to the PICTURE menu and highlight 3D Color Management.

2. Press Mode/enter and the 3D Color Management page displays.

3. Highlight Primary Color and press eLeft orfRight to select a color from among Red,

Yellow, Green, Cyan, Blue, or Magenta.

4. Press d to highlight Hue and press eLeft orfRight to select its range. Increase in the

range will include colors consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right for

how the colors relate to each other.

For example, if you select Red and set its

range at 0, only pure red in the projected

picture will be selected. Increasing its range

will include red close to yellow and red close

to magenta.

5. Press d to highlight Saturation and adjust its

values to your preference by pressing eLeft

orfRight. Every adjustment made will reflect

to the image immediately.

RED

BLUE

GREEN

Yellow

Cyan

Magenta

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BenQ mp 622 c Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BenQ mp 622 c

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info