214621
21
Zoom out
Zoom in
Vorherige Seite
1/62
Nächste Seite
Connection 17
Connection
When connecting a signal source to the projector, be sure to:
1. Turn all equipment off before making any connections.
2. Use the correct signal cables for each source.
3. Ensure the cables are firmly inserted.
In the connections shown below, some cables may not be included with the
projector (see "Shipping contents" on page 6). They are commercially available
from electronics stores.
Wireless connection (optional)
The Wireless module allows for simultaneous wireless connectivity to multiple computers
which are wireless enabled. This saves you from having to swap data cables between the
projector and different computers during a presentation. Wireless connectivity is most
suitable for situations where multiple presenters with separate notebooks are required to
seamlessly present individual presentations, like in meetings, conferences, lectures and,
classrooms.
Even though the Wireless module is not attached to the projector, everytime the projector is
turned on, the status of wireless connection will display on the screen while the projector is
searching for input signals during the start up procedure.
The Wireless module connects and attaches to the rear of the projector through the DVI-I
socket.
While the Wireless module is attached to the projector, you cannot use the DVI-I socket for DVI
cable connections.
Even though the projector may be using a wireless data connection, it still requires physical
connection to a power outlet using its power cable.
You can purchase a BenQ wireless
module from BenQ retailers. You
should attach the wireless module
to the projector before you connect
any other cables. Refer to the user
manual enclosed with the wireless
module for connection and
operation details.
Cable connection
Connecting a computer or monitor
Connecting a computer
The projector provides a VGA and DVI input sockets that allow you to connect it to a laptop
or desktop computer.
Projector with the wireless module
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für BenQ mp 721 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von BenQ mp 721

BenQ mp 721 Bedienungsanleitung - Holländisch - 63 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info